This project has retired. For details please refer to its Attic page.
Command Interface Guide

License Statement

Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Acknowledgements

Microsoft®, Windows®, Windows NT®, Windows® XP, and Windows Vista® are U.S. registered trademarks of Microsoft Corporation. Intel® and Intel® Itanium® are trademarks of Intel Corporation in the U.S. and other countries. Java® is a registered trademark of Oracle and/or its affiliates. Motif, OSF/1, UNIX®, X/Open®, and the X device is a trademark of X/Open Company Ltd. in the UK and other countries.

OSF, OSF/1, OSF/Motif, Motif, and Open Software Foundation are trademarks of the Open Software Foundation in the U.S. and other countries. © 1990, 1991, 1992, 1993 Open Software Foundation, Inc.

The OSF documentation and the OSF software to which it relates are derived in part from materials supplied by the following: © 1987, 1988, 1989 Carnegie-Mellon University. © 1989, 1990, 1991 Digital Equipment Corporation. © 1985, 1988, 1989, 1990 Encore Computer Corporation. © 1988 Free Software Foundation, Inc. © 1987, 1988, 1989, 1990, 1991 Hewlett-Packard Company. © 1985, 1987, 1988, 1989, 1990, 1991, 1992 International Business Machines Corporation. © 1988, 1989 Massachusetts Institute of Technology. © 1988, 1989, 1990 Mentat Inc. © 1988 Microsoft Corporation. © 1987, 1988, 1989, 1990, 1991, 1992 SecureWare, Inc. © 1990, 1991 Siemens Nixdorf Informations systeme AG. © 1986, 1989, 1996, 1997 Sun Microsystems, Inc. © 1989, 1990, 1991 Transarc Corporation.

OSF software and documentation are based in part on the Fourth Berkeley Software Distribution under license from The Regents of the University of California. OSF acknowledges the following individuals and institutions for their role in its development: Kenneth C.R.C. Arnold, Gregory S. Couch, Conrad C. Huang, Ed James, Symmetric Computer Systems, Robert Elz. © 1980, 1981, 1982, 1983, 1985, 1986, 1987, 1988, 1989 Regents of the University of California. OSF MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE OSF MATERIAL PROVIDED HEREIN, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. OSF shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this material.

Revision History

Version Date

2.2.0

TBD

2.1.0

May 1, 2017

2.0.1

July 7, 2016

2.0.0

June 6, 2016

1.3.0

January, 2016

1. About This Document

This guide describes how to use the Trafodion Command Interface (trafci) on a client workstation to connect to and query a Trafodion database. The trafci enables you to run SQL statements interactively or from script files.

1.1. Intended Audience

This guide is intended for database administrators and support personnel who are maintaining and monitoring a Trafodion database.

1.2. New and Changed Information

This manual shows updated versions for Trafodion Release 2.4.0.

1.3. Notation Conventions

This list summarizes the notation conventions for syntax presentation in this manual.

  • UPPERCASE LETTERS

    Uppercase letters indicate keywords and reserved words. Type these items exactly as shown. Items not enclosed in brackets are required.

    SELECT
  • lowercase letters

    Lowercase letters, regardless of font, indicate variable items that you supply. Items not enclosed in brackets are required.

    file-name
  • [ ] Brackets

    Brackets enclose optional syntax items.

    DATETIME [start-field TO] end-field

    A group of items enclosed in brackets is a list from which you can choose one item or none.

    The items in the list can be arranged either vertically, with aligned brackets on each side of the list, or horizontally, enclosed in a pair of brackets and separated by vertical lines.

    For example:

    DROP SCHEMA schema [CASCADE]
    DROP SCHEMA schema [ CASCADE | RESTRICT ]
  • { } Braces

    Braces enclose required syntax items.

    FROM { grantee [, grantee ] ... }

    A group of items enclosed in braces is a list from which you are required to choose one item.

    The items in the list can be arranged either vertically, with aligned braces on each side of the list, or horizontally, enclosed in a pair of braces and separated by vertical lines.

    For example:

    INTERVAL { start-field TO end-field }
    { single-field }
    INTERVAL { start-field TO end-field | single-field }
  • | Vertical Line

    A vertical line separates alternatives in a horizontal list that is enclosed in brackets or braces.

{expression | NULL}
  • … Ellipsis

    An ellipsis immediately following a pair of brackets or braces indicates that you can repeat the enclosed sequence of syntax items any number of times.

    ATTRIBUTE[S] attribute [, attribute] ...
    {, sql-expression } ...

    An ellipsis immediately following a single syntax item indicates that you can repeat that syntax item any number of times.

    For example:

    expression-n ...
  • Punctuation

    Parentheses, commas, semicolons, and other symbols not previously described must be typed as shown.

    DAY (datetime-expression)
    @script-file

    Quotation marks around a symbol such as a bracket or brace indicate the symbol is a required character that you must type as shown.

    For example:

    "{" module-name [, module-name] ... "}"
  • Item Spacing

    Spaces shown between items are required unless one of the items is a punctuation symbol such as a parenthesis or a comma.

    DAY (datetime-expression) DAY(datetime-expression)

    If there is no space between two items, spaces are not permitted. In this example, no spaces are permitted between the period and any other items:

    myfile.sh
  • Line Spacing

    If the syntax of a command is too long to fit on a single line, each continuation line is indented three spaces and is separated from the preceding line by a blank line.

    This spacing distinguishes items in a continuation line from items in a vertical list of selections.

    match-value [NOT] LIKE _pattern
       [ESCAPE esc-char-expression]

1.4. Comments Encouraged

We encourage your comments concerning this document. We are committed to providing documentation that meets your needs. Send any errors found, suggestions for improvement, or compliments to user@trafodion.apache.org.

Include the document title and any comment, error found, or suggestion for improvement you have concerning this document.

2. Introduction

The Trafodion Command Interface (trafci) is a command-line interface that you download and install on a client workstation that has the Trafodion JDBC Type 4 Driver installed. Operating systems that support the JDBC driver include Windows and Linux. The JDBC driver connects trafci on a client workstation to a Trafodion database.

trafci Connected to a Trafodion Database

trafci enables you to perform daily administrative and database management tasks by running SQL statements or other commands interactively or from script files. You can also run trafci from a Perl or Python command line or from Perl or Python programs.

3. Install and Configure

3.1. Install trafci

To install trafci on a client workstation, follow the procedures in the Trafodion Client Installation Guide. Ensure that you set up the Java Path per the instructions in that guide.

3.2. Test trafci Launch

  1. Launch trafci and verify that you can connect to the database. For instructions, see Launch trafci.

    This window should appear:

    image

  2. If you cannot launch trafci or connect to the database, verify that:

    • The database platform is available and running, and the port number is correct for the database platform.

    • The Java path is set to the correct location. See Verify and Set the Java Path.

    • You installed the trafci and JDBC software files correctly.

4. Launch trafci

This chapter describes how to launch trafci from the Window or Linux environment of a client workstation. For information about launching trafci from Perl or Python, see Run trafci from Perl or Python.

Before launching trafci, make sure that you have set the Java path to the correct location. See Verify and Set Java Path.

4.1. Launch trafci on Windows Workstation

  1. Find the Windows launch file, trafci.cmd, in the bin folder:

    Navigate to bin folder

  2. Double-click the trafci.cmd file.

    trafci appears, prompting you to enter the host name or IP address of the database platform, your user name, and password. See Log In to Database Platform.

4.1.1. Create trafci.cmd Shortcut

To enable a user to launch trafci from a shortcut icon on the desktop:

  1. Right-click the desktop and select New>Shortcut:

    Select trafci.cmd file

  2. Type the location of trafci.cmd within double quotes (") or click Browse to locate that file, and then click Next:

    Select shortcut from menu

    For the locations of the installed trafci software files, see the Trafodion Client Installation Guide.

  3. Type a name for the shortcut and click Finish:

    Name shortcut

  4. If desired, specify optional launch parameters for the shortcut:

    1. Right-click the shortcut icon and select Properties:

      Select properties

    2. Select the Shortcut tab.

    3. In the Target box, insert a space after "…\Trafodion Command Interface\bin\trafci.cmd" and add the optional launch parameters:

      Add optional launch parameters

      For more information, see Optional Launch Parameters.

    4. Click OK.

  5. To launch trafci, double-click the shortcut icon.

    trafci appears. If you did not set the optional launch parameters, trafci prompts you to enter the host name or IP address of the database platform, your user name, and password. See Log In to Database Platform.

4.2. Launch trafci on Linux Workstation

In the terminal window, enter:

./<trafci-installation-directory>/trafci/bin/trafci.sh

<trafci-installation-directory> is the directory where you installed the trafci software files. For more information, see the Trafodion Client Installation Guide.

4.2.1. Set trafci.sh PATH

To enable a user to launch trafci anywhere on the client workstation:

  1. Open the user profile (.profile or .bash_profile for the Bash shell) in the $HOME directory.

    cd $HOME
    vi .profile
  2. In the user profile, set the PATH environment variable to include the path of the trafci.sh file.

    export PATH=/<trafci-installation-directory>/trafci/bin/: ...

    trafci-installation-directory is the directory where you installed the trafci software files. For more information, see the Trafodion Client Installation Guide. Check that no space is after the colon (:) in the path.

    In the C shell, use the setenv command instead of export.
  3. To activate the changes, either log out and log in again or execute the user profile.

    . .profile
  4. On the command line, execute the trafci.sh file to launch trafci:

    trafci.sh

    trafci appears, prompting you to enter the host name or IP address of the database platform, your user name, and password. See Log In to Database Platform.

    To enable all users to launch trafci anywhere on the system, create a symbolic link to the trafci.sh file in the /usr/bin or /usr/local/bin directory:
    ln -s ./<trafci-installation-directory>/trafci/bin/trafci.sh /usr/bin/trafci.sh

4.2.2. Preset the Optional Launch Parameters

To preset the optional launch parameters for each session, use an alias in the shell command.

alias trafci='trafci.sh -h 16.123.456.78:23400 -u user1 -p xxxxxx'

You can add the alias, trafci, to the user profile, or you can enter it at a command prompt. For more information about the optional launch parameters, see Use Optional Launch Parameters.

4.3. Log In to Database Platform

4.3.1. Log In Without Login Parameters

If you launch trafci and do not specify login parameters on the command line, follow these steps:

  1. After you launch trafci, trafci shows the welcome banner and prompts you to enter the host name or IP address of the database platform:

    Host Name/IP Address: _

    Enter a host name:

    host-name[.domain-name][:port-number]
    • If you do not specify the domain name, trafci uses the domain of the client workstation.

    • If you do not specify a port number, trafci uses the default port umber, which is 23400.

      Or enter an IP address:

      IP-address[:port-number]
  2. Enter your directory-service (or LDAP) user name. User names are case-insensitive.

  3. Enter your password. Passwords are case-sensitive.

  4. After you finish logging in to the database platform, the SQL prompt appears:

    Connected to Trafodion
    
    SQL>

At the prompt, you can enter an SQL statement or an interface command. For more information, see Run Interactive Commands in trafci.

trafci allows you to reenter the login values, with a maximum of three retries, before it closes the session. For more information, see Retry Login.

4.3.2. Use Login Parameters

To avoid entering a host name, user name, or password each time you launch trafci, use these login parameters:

  • -h or -host

  • -u or -user

  • -p or -password

Example: Windows Login

cd <trafci-installation-directory>\Trafodion Command Interface\bin

trafci.cmd -h 16.123.456.78:23400 -u user1 -p xxxxxx

Example: Linux Login

cd <trafci-installation-directory>/trafci/bin

./trafci.sh -h 16.123.456.78:23400 -u user1 -p xxxxxx

trafci launches and prompts you to enter an SQL statement or an interface command:

Welcome to Trafodion Command Interface
Copyright(C) 2013–2105 Apache Software Foundation

Connected to Trafodion

SQL>

For more information about the login parameters, see Use Optional Launch Parameters.

You can include these parameters in a shortcut to the trafci.cmd file or in a launch file for the trafci.sh file. For more information, see Create trafci.cmd Shortcut or Preset the Optional Launch Parameters, respectively.

4.4. Retry Login

trafci allows you to reenter the login values, with a maximum of three retries, before it closes the session.

trafci applies the retry logic as follows:

  • If you specify an invalid host name, trafci prompts you to reenter the host name.

    Example

    $ trafci –h dd # dd is invalid
    
    Welcome to Trafodion Command Interface
    Copyright(C) 2013–2105 Apache Software
    
    Unknown Host: dd
    
    Host Name/IP Address: 172.16.1.1
    
    User Name: user1
    Password:
    
    Connected to Trafodion SQL>
  • If you specify an invalid user name or password, trafci prompts you to reenter the user name and password.

    If you specify an invalid password, trafci prompts only for your user name and password. After three unsuccessful retries, the session is terminated:

    Example

    $ trafci –h 172.16.1.1 –u user1 –p x
    
    Welcome to Trafodion Command Interface
    Copyright(C) 2013–2105 Apache Software
    
    **** ERROR[8837] CLI Authentication : User: user1 : invalid username or password [2105-03-12 16:23:44]
    
    User Name: user1
    Password:
    
    **** ERROR[8837] CLI Authentication : User: user1 : invalid username or password [2105-03-12 16:25:28]
    
    User Name: user1
    Password:
    
    **** ERROR[8837] CLI Authentication : User: user1 : invalid username or password [2105-03-12 16:26:36]
    
    Press any key to close this session
  • If all the login parameters that you specify are invalid, trafci prompts you to enter the host name. When you enter a valid host name or IP address, trafci prompts you to enter a user name and password.

  • The retry logic applies to the CONNECT and RECONNECT commands. For the RECONNECT command, the retry logic applies only when no prior connection has been established (-noconnect).

    For example, if you specify the CONNECT command with a valid user name and host name, then trafci prompts for the user name and password only.

    SQL> connect user1/xxx@172.16.1.1
    
    org.trafodion.jdbc.t4.TrafT4Exception: **** ERROR[8837] CLI Authentication : User: user1 : invalid username or password [2105-03-12 16:35:15]
    
    User Name: user1
    Password: abc
    
    Connected to Trafodion SQL>
  • trafci does not prompt you to reenter the login values in these cases:

  • When you include the -q or -version parameter on the command line. (The -s parameter permits login retries.)

    • For a session started using redirected or piped input.

In these cases, trafci returns an error message and closes the session. You must re-launch the trafci session to connect to the Trafodion database.

4.5. Optional Launch Parameters

To customize how you launch and log in to trafci, use the optional parameters described in the table below on the command line:

trafci{.sh | .cmd} [optional-parameter]...
  • optional-parameter

    is one of the launch or login parameters. For details, see the following table.

    Launch or Login Parameter Description

    {-h | -host} host-name[:port-number]
    {-h | -host} IP-address[:port-number]

    Specifies the host name or IP address of the database platform to which you want the client to connect. The host-name should include the domain name of the database platform if it is different from the domain of the client workstation. If you do not specify a port number, trafci uses the default port number, which is 23400.

    See Use Login Parameters.

    {-u | -user} username

    Specifies the user name for logging in to the database platform. The username is case-insensitive.

    For an example, see Use Login Parameters.

    {-r | -role} role-name

    Reserved for future use.

    {-p | -password} password

    Specifies the password of the user for logging in to the database platform. password is case-sensitive.

    For an example, see Use Login Parameters.

    {-q | -sql} "command"

    Specifies that an SQL statement or an interface command be run when launching trafci. You cannot specify this parameter at the same time as the -s or -script parameter.

    For more information, see Run Command When Launching trafci.

    {-s | -script} script-file-name

    Specifies that a script file be run when launching trafci in interactive mode. You cannot specify this parameter at the same time as the -q or -sql parameter.

    For more information, see Run Script When Launching trafci.

    -noconnect

    Launches an trafci session without connecting to the database.

    For more information, see Launch trafci Without Connecting to the Database.

    -version

    Displays the build version of trafci and the Trafodion JDBC Type 4 Driver. Upon completion of the display, the client exits.

    If any other parameters are included with the -version parameter, they are ignored.

    For more information, see Run trafci With -version.

    -help

    Displays a list of accepted arguments with descriptions and then exits.

    For more information, see Run trafci With -version.

4.6. Run Command When Launching trafci

To execute an SQL statement or an interface command when launching trafci, use the -q or -sql command-line parameter. This parameter enables you to run a single command on the command line without having to enter commands in trafci.

You cannot specify this parameter at the same time as the -s or -script parameter.

When using -q or -sql, you must enclose the command in double quotes ("). The SQL terminator is not required at the end of an SQL statement and is disallowed after an interface command.

Although you can run any of the interface commands with -q or -sql, the @, OBEY, and PRUN commands are the most useful.

Example

Use -q or -sql with the CREATE SCHEMA statement to create a schema when launching trafci:

  • On Windows, in the Command Prompt window, enter:

    cd _trafci-installation-directory_\Trafodion Command Interface\bin
    trafci.cmd -q "create schema persnl"
  • On Linux or UNIX, in the terminal window, enter:

    cd _trafci-installation-directory_/trafci/bin
    ./trafci.sh -q "create schema persnl"

After you enter the SQL statement, trafci launches and prompts you to log in by default (if you did not specify -h, -u, and -p on the command line), runs the SQL statement, and then returns to the command prompt:

Host Name/IP Address: 16.123.456.78:23400 User Name: user1

Password:

--- SQL operation complete.

C:\Program Files (x86)\Apache Software Foundation\Trafodion Command Interface\bin>

Example

Use -q or -sql with the PRUN command to run multiple script files simultaneously from the command line:

  • On Windows, in the Command Prompt window, enter:

    cd <trafci-installation-directory>\Trafodion Command Interface\bin
    trafci.cmd -q "prun"
  • On Linux, in the terminal window, enter:

    cd <trafci-installation-directory>/trafci/bin
    ./trafci.sh -q "prun"

After you enter the interface command, trafci launches and prompts you to log in by default (if you did not specify -h, -u, and -p on the command line), and runs the command.\ The parallel run (PRUN) operation prompts you to enter settings and then executes the script files. At the end of the PRUN operation, trafci returns to the command prompt.

For more information about the PRUN operation, see PRUN Command.

4.7. Run Script When Launching trafci

To run a script file when launching trafci, use the -s or -script command-line parameter.

You cannot specify this parameter at the same time as the -q or -sql parameter.

After you launch trafci with -s or -script, trafci executes the script file in interactive mode. trafci remains open until you enter the EXIT, QUIT, or DISCONNECT command. To quit the interface immediately after executing a script file, include the EXIT, QUIT, or DISCONNECT command at the end of the script file.

Example

You can create a script file that contains SET commands that customize a session when you launch trafci:

image

For more information, Create a Script File.

Example

  • On Windows, in the Command Prompt window, enter:

    cd <trafci-installation-directory>\Trafodion Command Interface\bin
    trafci.cmd -s settings.txt

    Specify the full path of the script file if it is outside the directory of trafci.cmd.

  • On Linux, in the terminal window, enter:

    cd <trafci-installation-directory>/trafci/bin +
    ./trafci.sh -s settings.txt

    Specify the full path of the script file if it is outside the directory of trafci.sh.

trafci launches and prompts you to log in by default (if you did not specify -h, -u, and -p on the command line), and runs the commands in the script file:

Welcome to Trafodion Command Interface
Copyright(C) 2013–2105 Apache Software Foundation

Host Name/IP Address: 16.123.456.78:23400 User Name: user1
Password:
Connected to Trafodion

SQL>SET IDLETIMEOUT 0

SQL>SET SQLPROMPT *

*SET TIME ON

14:14:57 *SET TIMING ON

2:14:57 PM *SET SQLTERMINATOR .

4.8. Launch trafci Without Connecting to the Database

To start trafci without connecting to a Trafodion database, use the -noconnect option. See DISCONNECT command for a list of interface commands that can be run without a connection.

Example

  • On Windows, in the Command Prompt window, enter:

    cd <trafci-installation-directory>\Trafodion Command Interface\bin
    trafci.cmd -noconnect
  • On Linux, in the terminal window, enter:

    cd <trafci-installation-directory>/trafci/bin
    ./trafci.sh -noconnect

4.9. Run trafci With -version

To display the build version of trafci and the Trafodion JDBC Type 4 Driver, use the -version option. If other parameters are included with the -version parameter, they are ignored.

Example

  • On Windows, in the Command Prompt window, enter:

    cd <trafci-installation-directory>\Trafodion Command Interface\bin
    trafci.cmd -version
  • On Linux, in the terminal window, enter:

    cd <trafci-installation-directory>/trafci/bin
    ./trafci.sh -version
    Welcome to Trafodion Command Interface
    Copyright(C) 2013–2105 Apache Software Foundation
    
    Trafodion JDBC Type 4 Driver : Traf_JDBC_Type4_Build_40646 Trafodion
    Command Interface : trafci_Build_40646

4.10. Run trafci With -help

To display a list of acceptable list of parameters, including proper usage information, use the -help option. After displaying this information the application exits.

Example

  • On Windows, in the Command Prompt window, enter:

    cd <trafci-installation-directory>\Trafodion Command Interface\bin
    trafci -help
  • On Linux, in the terminal window, enter:

    cd <trafci-installation-directory>/trafci/bin
    ./trafci.sh -help

4.11. Exit trafci

To exit trafci, enter one of these commands at a prompt:

  • EXIT

  • QUIT

Example

SQL> QUIT

These commands are not case-sensitive and do not require a terminator before you press Enter. After you enter one of these commands, trafci immediately quits running and disappears from the screen.

5. Run Commands Interactively

After launching trafci, you can run SQL statements and interface commands in the command-line interface.

5.1. User Interface

5.1.1. Product Banner

After you launch trafci and connect to the database platform, the product banner appears in the command-line interface:

Product banner

5.1.2. Interface Prompt

The standard prompt is SQL>. You can change the prompt, SQL>, to something else by using the SET SQLPROMPT or SET PROMPT command. For more information, Customize the Standard Prompt.

5.1.3. Break the Command Line

You cannot break an interface command over multiple lines. Each interface command must be entered on one line. If you accidentally break an interface command across more than one line, enter the SQL terminator and then reenter the command on one line.

You can continue any SQL statement over multiple lines, breaking that statement at any point except within a word, a numeric literal, or a multi-character operator (for example, <=). To break a string literal in a DML statement, use a concatenation operator (||). For more information, see the concatenation operator in the Trafodion SQL Reference Manual.

To terminate an SQL statement that spans multiple lines, use the SQL terminator for the session. You can also include several SQL statements on the same command line provided that each one is terminated by the SQL terminator. For more information, see Set and Show the SQL Terminator.

5.1.4. Case Sensitivity

In the command-line interface, you can enter SQL statements and interface commands in uppercase, lowercase, or mixed-case characters. All parts of statements and commands are case-insensitive except for parts that you enclose in single-quotes (') or double-quotes (").

5.2. Interface Commands

The interface commands allow you to customize trafci (for example, by using SET commands) or return information about the interface settings or database objects (for example, by using SHOW commands).

For more information about the interface commands, see Commands.

Each interface command must be entered on one line. If you accidentally break an interface command across more than one line, enter the SQL terminator and then reenter the command on one line.

5.2.1. Show Session Attributes

To display the attributes and settings of the current trafci session, use the ENV, SHOW SESSION, or SESSION command.

Example

This SESSION command displays the session attributes:

SQL> SESSION

COLSEP           " "
HISTOPT          DEFAULT [No expansion of script files]
IDLETIMEOUT      0 min(s) [Never Expires]
LIST_COUNT       0 [All Rows]
LOG FILE         c:\session.txt
LOG OPTIONS      APPEND,CMDTEXT ON
MARKUP           RAW
PROMPT           SQL>
SCHEMA           SEABASE
SERVER           sqws135.houston.host.com:23400
SQLTERMINATOR    ;
STATISTICS       OFF
TIME             OFF
TIMING           OFF
USER             user1

SQL>

For more information, see ENV Command SHOW SESSION Command.

5.2.2. Set and Show Session Idle Timeout Value

The idle timeout value of a session determines when the session expires after a period of inactivity. To set the idle timeout value of a session, enter the SET IDLETIMEOUT command.

Example

This SET IDLETIMEOUT 0 command sets the idle timeout to an infinite amount of time so that the session never expires:

SQL> SET IDLETIMEOUT 0
SQL>

To show the idle timeout value that is in effect for the session, enter the SHOW IDLETIMEOUT command.

Example

This SHOW IDLETIMEOUT command displays an idle timeout of zero minutes, which means that the session never expires:

SQL> SHOW IDLETIMEOUT

IDLETIMEOUT 0 min(s) [Never Expires]

SQL>

For more information, see the SET IDLETIMEOUT Command and the <<cmd_show_idletimeout, SET IDLETIMEOUT Command>.

5.2.3. Customize the Standard Prompt

To change the standard prompt in the command-line interface, use one or both of these commands:

SET PROMPT Command

The SET PROMPT command changes the default prompt to a specified character or string.

Example

This SET PROMPT command changes the prompt to the current user (user1) and ENTER>:

SQL>set prompt "%USER ENTER>"

user1 ENTER>

For more information, see SET PROMPT Command.

SET TIME Command

The SET TIME ON command causes the current time of the client workstation to be displayed in the prompt:

SQL ENTER> SET TIME ON

20:32:26 SQL ENTER>

The SET TIME OFF command removes the current time from the prompt:

20:32:26 SQL ENTER> SET TIME OFF

SQL ENTER>

For more information, see the SET TIME Command.

5.2.4. Set and Show the SQL Terminator

The SQL terminator symbolizes the end of an SQL statement. By default, the SQL terminator is a semicolon (;).

To change the SQL terminator, enter the SET SQLTERMINATOR command.

Example

This SET SQLTERMINATOR command sets the SQL terminator to a period (.):

SQL> SET SQLTERMINATOR .
SQL> INSERT INTO sales.custlist
+> (SELECT * FROM invent.supplier
+> WHERE suppnum=8).

--- 1 row(s) inserted.
SQL>

To show the SQL terminator that is in effect for the session, enter the SHOW SQLTERMINATOR command.

Example

This SHOW SQLTERMINATOR command displays SQLTERMINATOR ., where the period (.) is the SQL terminator for the session:

SQL> SHOW SQLTERMINATOR
SQLTERMINATOR .

SQL>

For more information, see the SET SQLTERMINATOR Command and the SHOW SQLTERMINATOR Command.

5.2.5. Display the Elapsed Time

By default, trafci does not display the elapsed time of an SQL statement after the statement executes. To display the elapsed time after each SQL statement executes, enter the SET TIMING ON command:

SQL> SET TIMING ON
SQL> SELECT suppname, street, city, state, postcode
+> FROM invent.supplier
+> WHERE suppnum=3;

SUPPNAME          STREET               CITY           STATE        POSTCODE
----------------- -------------------- -------------- ------------ ----------
HIGH DENSITY INC  7600 EMERSON         NEW YORK       NEW YORK     10230

--- 1 row(s) selected. Elapsed :00:00:00.111 SQL>

To prevent the elapsed time from being displayed after each SQL statement executes, enter the SET TIMING OFF command:

SQL> SET TIMING OFF
SQL> /

SUPPNAME          STREET               CITY           STATE        POSTCODE
----------------- -------------------- -------------- ------------ ----------
HIGH DENSITY INC  7600 EMERSON         NEW YORK       NEW YORK     10230

--- 1 row(s) selected.

SQL>

For more information, see the SET TIMING Command.

5.2.6. Set and Show the Current Schema

By default, the schema of the session is USR. The SQL statement, SET SCHEMA, allows you to set the schema for the trafci session.

Example

This SET SCHEMA statement changes the default schema to PERSNL for the session:

SQL> SET SCHEMA persnl;

--- SQL operation complete.

SQL> DELETE FROM employee
+> WHERE first_name='TIM' AND
+> last_name='WALKER';

--- 1 row(s) deleted.

SQL>

The schema that you specify with SET SCHEMA remains in effect until the end of the session or until you execute another SET SCHEMA statement.

If you execute this statement in a script file, it affects not only the SQL statements in the script file but all subsequent SQL statements that are run in the current session. If you set the schema in a script file, reset the default schema for the session at the end of the script file.

For more information about the SET SCHEMA statement, see the Trafodion SQL Reference Manual.

The SHOW SCHEMA command displays the current schema for the session.

Example

This SHOW SCHEMA command displays SCHEMA PERSNL, where PERSNL is the name of the current schema for the session:

SQL> SHOW SCHEMA SCHEMA persnl
SQL>

For more information, SHOW SCHEMA Command.

5.2.7. Limit Query Result Set

To set the maximum number of rows to be returned by SELECT statements that are executed in the session, enter the SET LIST_COUNT command.

Example

This SET LIST_COUNT command limits the result set of queries to 20 rows:

SQL> SET LIST_COUNT 20

To show the limit that is in effect for the session, enter the SHOW LIST_COUNT command.

Example

This SHOW LIST_COUNT command shows that the number of rows returned by SELECT statements is unlimited:

SQL> SHOW LIST_COUNT

LISTCOUNT 0 [All Rows]

For more information, see the SET LIST_COUNT Command and SHOW LIST_COUNT Command.

5.2.8. Display Executed Commands

To display commands that were recently executed in the trafci session, enter the HISTORY command. The HISTORY command associates each command with a number that you can use to re-execute or edit the command with the FC command. See Edit and Reexecute a Command.

Example

This HISTORY command displays a maximum of 100 commands that were entered in the session:

SQL> HISTORY

1> SET IDLETIMEOUT 0
2> SET SCHEMA persnl;
3> SELECT * FROM project;

SQL>

To save the session history in a user-specified file, enter the SAVEHIST command.

Example

This SAVEHIST command saves the session history in a file named history.txt in the local directory where you are running trafci:

SQL> SAVEHIST history.txt

For more information, see the HISTORY Command and the SAVEHIST Command.

5.2.9. Edit and Reexecute a Command

To edit and reexecute a command in the history buffer of an trafci session, enter the FC command. To display the commands in the history buffer, use the HISTORY command. See Display Executed Commands.

Example

This FC command and its delete (D) editing command correct a SELECT statement that was entered incorrectly:

SQL> FC

SQL> SELECCT FROM employee;
     .... d
SQL> SELECT FROM employee;

Pressing Enter executes the corrected SELECT statement. For more information, see the FC Command.

5.2.10. Clear the Interface Window

After entering commands in trafci, you can clear the interface window by using the CLEAR command.

Example

This CLEAR command clears the interface window so that only the prompt appears at the top of the window:

SQL> CLEAR

For more information, see the CLEAR Command.

5.2.11. Obtain Help

To display help text for an interface command that is supported in trafci, enter the HELP command.

Example

This HELP command displays syntax and examples of the FC command:

SQL> HELP FC

For more information, see the HELP Command.

5.3. Run SQL Statements

In trafci, you can run SQL statements interactively. trafci supports all the SQL statements, SQL utilities, and other SQL-related commands that the Trafodion database engine supports. For more information about those SQL statements, see the Trafodion SQL Reference Manual.

To run SQL statements from script files in trafci, see Run Scripts.

5.3.1. Execute an SQL Statement

Example

You can query the EMPLOYEE table and return an employee’s salary by executing this SELECT statement in trafci:

SQL> SELECT salary
+> FROM persnl.employee
+> WHERE jobcode=100;

SALARY
----------
 175500.00
 137000.10
 139400.00
 138000.40
  75000.00
  90000.00
 118000.00
  80000.00
  70000.00
  90000.00
  56000.00

--- 11 row(s) selected.

SQL>

If the SQL statement executes successfully, trafci returns a message indicating that the SQL operation was successful, followed by the standard prompt. If a problem occurs during the execution of the SQL statement, trafci returns an error message.

5.3.2. Repeat an SQL Statement

To run a previously executed SQL statement, use the /, RUN, or REPEAT command.

SQL> /

SALARY
----------
 175500.00
 137000.10
 139400.00
 138000.40
  75000.00
  90000.00
 118000.00
  80000.00
  70000.00
  90000.00
  56000.00

--- 11 row(s) selected.

SQL>

For more information, see the / Command, RUN Command, or REPEAT Command.

5.3.3. Prepare and Execute SQL Statements

You can prepare, or compile, an SQL statement by using the PREPARE statement and later execute the prepared SQL statement by using the EXECUTE statement.

Prepare a SQL Statement

Use the PREPARE statement to compile an SQL statement for later execution with the EXECUTE statement. You can also use the PREPARE statement to check the syntax of an SQL statement without executing the statement.

Example

This PREPARE statement compiles a SELECT statement named empsal and detects a syntax error:

SQL> PREPARE empsal FROM
+> SELECT salary FROM employee
+> WHERE jobcode = 100;
SQL>

You can then correct the syntax of the SQL statement and prepare it again:

SQL> PREPARE empsal FROM
+> SELECT salary FROM persnl.employee
+> WHERE jobcode = 100;

--- SQL command prepared.

To specify a parameter to be supplied later, either in a SET PARAM statement or in the USING clause of an EXECUTE statement, use one of these types of parameters in the SQL statement:

  • Named parameter, which is represented by ?param-name

  • Unnamed parameter, which is represented by a question mark (?) character

Example

This prepared SELECT statement specifies unnamed parameters for salary and job code:

SQL> PREPARE findemp FROM
+> SELECT  FROM persnl.employee
+> WHERE salary > ? AND jobcode = ?;

--- SQL command prepared.

This PREPARE statement prepares another SELECT statement named empcom, which has one named parameter, ?dn, for the department number, which appears twice in the statement:

SQL> PREPARE empcom FROM
+> SELECT first_name, last_name, deptnum
+> FROM persnl.employee
+> WHERE deptnum <> ?dn AND salary <=
+> (SELECT AVG(salary)
+> FROM persnl.employee
+> where deptnum = ?dn);

--- SQL command prepared.

For the syntax of the PREPARE statement, see the Trafodion SQL Reference Manual.

Setting Parameters

In an trafci session, you can set a parameter of an SQL statement (either prepared or not) by using the SET PARAM command.

The parameter name is case-sensitive. If you specify it in lowercase in the SET PARAM command, you must specify it in lowercase in other statements, such as DML statements or EXECUTE.

Example

This SET PARAM command sets a value for the parameter named ?sal, which you can apply to one of the unnamed parameters in the prepared findemp statement or to a named parameter with an identical name in an SQL statement:

SQL> SET PARAM ?sal 40000.00

This SELECT statement uses sal as a named parameter:

SQL> SELECT last_name
+> FROM persnl.employee
+> WHERE salary = ?sal;

This SET PARAM command sets a value for the parameter named dn, which you can apply to the named parameter, ?dn, in the prepared empcom statement or to a named parameter with an identical name in an SQL statement:

SQL> SET PARAM ?dn 1500

For the syntax of the SET PARAM command, see the SET PARAM Command.

To determine what parameters you have set in the current session, use the SHOW PARAM command.

Example

This SHOW PARAM command displays the recent SET PARAM settings:

SQL> SHOW PARAM dn 1500
sal 40000.00
SQL>

For the syntax of the SHOW PARAM command, SHOW PARAM Command.

Reset the Parameters

To change the value of a parameter, specify the name of the parameter in the RESET PARAM command and then use the SET PARAM command to change the setting.

Example

Suppose that you want to change the salary parameter to 80000.00:

SQL> RESET PARAM ?sal
SQL> SET PARAM ?sal 80000.00
SQL>

Entering the RESET PARAM command without specifying a parameter name clears all parameter settings in the session.

Example

SQL> RESET PARAM
SQL> SHOW PARAM
SQL>

To use the parameters that you had set before, you must reenter them in the session:

SQL> SET PARAM ?dn 1500
SQL> SET PARAM ?sal 80000.00
SQL> SHOW PARAM dn 1500

sal 80000.00

SQL>

For the syntax of the RESET PARAM command, see the RESET PARAM Command.

5.3.4. Execute a Prepared SQL Statement

To execute a prepared SQL statement, use the EXECUTE statement.

Example

This EXECUTE statement executes the prepared empsal statement, which does not have any parameters:

SQL> EXECUTE empsal;

SALARY
----------
 137000.10
  90000.00
  75000.00
 138000.40
  56000.00
 136000.00
  80000.00
  70000.00
 175500.00
  90000.00
 118000.00

--- 11 row(s) selected.

SQL>

This EXECUTE statement executes the prepared empcom statement, which has one named parameter, ?dn, which was set by SET PARAM for the department number:

SQL>EXECUTE empcom;

FIRST_NAME      LAST_NAME            DEPTNUM
--------------- -------------------- -------
ALAN            TERRY                   3000
DAVID           TERRY                   2000
PETE            WELLINGTON              3100
JOHN            CHOU                    3500
MANFRED         CONRAD                  4000
DINAH           CLARK                   9000
DAVE            FISHER                  3200
GEORGE          FRENCHMAN               4000
KARL            HELMSTED                4000
JOHN            JONES                   4000
JOHN            HUGHES                  3200
WALTER          LANCASTER               4000
MARLENE         BONNY                   4000
BILL            WINN                    2000
MIRIAM          KING                    2500
GINNY           FOSTER                  3300
MARIA           JOSEF                   4000
HERB            ALBERT                  3300
RICHARD         BARTON                  1000
XAVIER          SEDLEMEYER              3300
DONALD          TAYLOR                  3100
LARRY           CLARK                   1000
JIM             HERMAN                  3000
GEORGE          STRICKER                3100
OTTO            SCHNABL                 3200
TIM             WALKER                  3000
TED             MCDONALD                2000
PETER           SMITH                   3300
MARK            FOLEY                   4000
HEIDI           WEIGL                   3200
ROCKY           LEWIS                   2000
SUE             CRAMER                  1000
MARTIN          SCHAEFFER               3200
HERBERT         KARAJAN                 3200
JESSICA         CRINER                  3500

--- 35 row(s) selected.

SQL>

This EXECUTE statement executes the prepared findemp statement, which has two unnamed parameters: ?sal, which was set by SET PARAM for the salary, and a parameter that was not set in advance for the job code:

SQL> EXECUTE findemp USING ?sal, 100;

EMP_NUM FIRST_NAME      LAST_NAME            DEPTNUM JOBCODE SALARY
------- --------------- -------------------- ------- ------- ---------
    213 ROBERT          WHITE                   1500     100  90000.00
     23 JERRY           HOWARD                  1000     100 137000.10
      1 ROGER           GREEN                   9000     100 175500.00
     29 JANE            RAYMOND                 3000     100 136000.00
     32 THOMAS          RUDLOFF                 2000     100 138000.40
     43 PAUL            WINTER                  3100     100  90000.00
     65 RACHEL          MCKAY                   4000     100 118000.00

--- 7 row(s) selected.
SQL>

For the syntax of the EXECUTE statement, see the Trafodion SQL Reference Manual.

5.4. Log Output

To log an trafci session, use the SPOOL or LOG command. The SPOOL and LOG commands record into a log file the commands that you enter in the command-line interface and the output of those commands.

5.4.1. Start the Logging Process

To start logging, enter one of these commands:

  • SPOOL ON or LOG ON

  • SPOOL log-file or LOG log-file

For more information, see the LOG Command and the SPOOL Command.

SPOOL ON or LOG ON Command

The SPOOL ON or LOG ON command logs information about a session in the sqlspool.lst file, which trafci stores in the bin directory:

  • On Windows:

    <trafci-installation-directory>\Trafodion Command Interface\bin\sqlspool.lst

    trafci-installation-directory is the directory where you installed the trafci software files.

  • On Linux:

    <trafci-installation-directory>/trafci/bin/sqlspool.lst

    trafci-installation-directory is the directory where you installed the trafci software files.

Example

This SPOOL ON command starts logging the session in the sqlspool.lst file:

SQL> SPOOL ON

5.4.2. SPOOL log-file or LOG log-file Command

The SPOOL log-file and LOG log-file commands record information about a session in a log file that you specify. If you specify a directory for the log file, the directory must exist as specified. Otherwise, an error occurs when you try to run the SPOOL or LOG command. If you do not specify a directory for the log file, trafci uses the bin directory.

Example

This SPOOL log-file command starts logging the session in the persnl_updates.log file in the C:\log directory:

SQL> SPOOL C:\log\persnl_updates.log
Using the CLEAR Option

The CLEAR option clears the contents of an existing log file before logging new information to the file. If you omit CLEAR, trafci appends new information to existing information in the log file.

Example

This SPOOL log-file CLEAR command clears existing information from the specified log file and starts logging the session in the log file:

SQL> SPOOL C:\log\persnl_updates.log clear
Log Concurrent the trafci Sessions

If you plan to run two or more trafci sessions concurrently on the same workstation, use the SPOOL log-file or LOG log-file command and specify a unique name for each log file. Otherwise, each session writes information to the same log file, making it difficult to determine which information belongs to each session.

5.4.3. Stopping the Logging Process

To stop logging, enter one of these commands:

  • SPOOL OFF

  • LOG OFF

Example

This SPOOL OFF command stops logging in an trafci session:

SQL> SPOOL OFF

5.4.4. View the Contents of a Log File

The log file is an ASCII text file that contains all the lines in trafci from the time you start logging to the time you stop logging. The logged lines include prompts, entered commands, output from commands, and diagnostic messages.

Example

This log file contains information from when you started logging to when you stopped logging:

================================================================================
Spooling started at May 29, 2105 4:52:23 PM
================================================================================

SQL> SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;

--- SQL operation complete. SQL>begin work;

--- SQL operation complete.

SQL> DELETE FROM employee WHERE empnum=32;

-- 1 row(s) deleted.

SQL> INSERT INTO employee
(empnum, first_name, last_name, deptnum, salary) values(51, 'JERRY',
'HOWARD', 1000, 137000.00);

-- 1 row(s) inserted.

SQL> UPDATE dept SET manager=50
where deptnum=1000;

--- 1 row(s) updated.

SQL> COMMIT WORK;

--- SQL operation complete.

SQL> LOG OFF

6. Run Scripts

6.1. Create a Script File

A script file that you run in trafci must be an ASCII text file that contains only these elements:

For an example, see <script_example, Example Script File>>.

You cannot use shell commands in a script file that you run in trafci. To create shell scripts that run trafci, see Run trafci from Perl or Python.

6.2. SQL Statements

Script files support any of the various SQL statements that you can run in trafci. For more information about SQL statements, see the Trafodion SQL Reference Manual.

6.3. Commands

Most interface commands are supported in script files except the FC command. For a list of the interface commands, see Commands.

6.4. Comments

You can include comments anywhere in a script file. SQL also supports comments. Comments are useful for documenting the functionality of the script file and for debugging. When debugging, use comments to disable specific statements or commands without removing them from the script file.

To denote a comment in a script file, use two hyphens before the comment:

-- comment

The end of the line marks the end of the comment.

6.5. Section Headers

To create sections of commands within a script file, put a section header at the beginning of each section:

?SECTION section-name

The section-name cannot begin with a number or an underscore. Each section name in a script file should be unique because trafci executes the first section that it finds that matches the section name in the @ or OBEY command. For more information, see the @ Command OBEY Command.

6.6. Example Script File

This script file creates tables in the inventory schema:

Sample script

6.7. Run a Script File

To run a script file in trafci, use the @ or OBEY command. The @ and OBEY commands run one script file at a time in trafci. To run a script file when launching trafci, see Run Script When Launching trafci.

Example

This @ command runs a script file, sch_invent.sql, that creates tables in the inventory schema:

@C:\ddl_scripts\sch_invent.sql

If the script file is outside the directory of the trafci.cmd or trafci.sh file (by default, the bin directory), you must specify the full path of the script file in the @ or OBEY command.
SQL>@C:\ddl_scripts\sch_invent.sql
SQL>-- CREATE SCHEMA
SQL>CREATE SCHEMA INVENT;

--- SQL operation complete.

SQL>-- CREATE TABLES/VIEWS in SCHEMA INVENT
SQL> SET SCHEMA INVENT;

--- SQL operation complete.

SQL>CREATE TABLE INVENT.supplier (
+> suppnum NUMERIC (4) UNSIGNED
+> NO DEFAULT
+> NOT NULL
+> ,suppname CHARACTER (18)
+> NO DEFAULT
+> NOT NULL
+> ,street CHARACTER (22)
+> NO DEFAULT
+> NOT NULL
+> ,city CHARACTER (14)
+> NO DEFAULT
+> NOT NULL
+> ,state CHARACTER (12)
+> NO DEFAULT
+> NOT NULL
+> ,postcode CHARACTER (10)
+> NO DEFAULT
+> NOT NULL
+> ,PRIMARY KEY (suppnum)
+> );

--- SQL operation complete.

For more information about the @ and OBEY commands, see the @ Command and the OBEY Command.

6.8. Log Output

To log output of an trafci session while running one script file at a time, use the SPOOL or LOG command. When you run an OBEY or @ command, trafci displays each command in the script file, the output for each command, and diagnostic messages in trafci. The SPOOL or LOG command captures this output as it appears in trafci and logs it in a log file.

For more information, Log Output.

6.9. Run Scripts in Parallel

In trafci, the @ and OBEY commands allow you to run only one script file at a time. However, the PRUN command allows you to run multiple script files simultaneously.

The PRUN command is most useful for running sets of data definition language (DDL) statements simultaneously, which speeds up the process of creating large databases. Put all dependent or related DDL statements in the same script file. For more information on running scripts in parallel using the PRUN command, see the PRUN Command.

7. Run trafci From Perl or Python

You can execute SQL statements in Perl or Python by invoking the trafci Perl or Python wrapper script.

These instructions assume that you installed the trafci product. For more information, see Install and Configure.

7.1. Set the Login Environment Variables

Before launching trafci from Perl or Python, set these login environment variables:

Environment Variable Description
TRAFCI_PERL_JSERVER=<JavaServer_jar_path>

Specifies the Perl JavaServer JAR location.

TRAFCI_PYTHON_JSERVER=<Jython_jar_path>

Specifies the Jython JAR file location.

TRAFCI_PERL_JSERVER_PORT=<port_number>

Specifies the port on which the JavaServer is listening.

The Trafodion Command Interface Installer Wizard can attempt to automatically download and install both the Perl JavaServer and Jython open source extensions. If you wish to download and install them manually, refer to the instructions in the README file in the samples directory.

To set the login environment variables, see the instructions for the operating system of the client workstation:

The Perl and Python wrapper scripts do not require these environment variables:
  • TRAFCI_SERVER

  • TRAFCI_USER

  • TRAFCI_PASSWORD

7.1.1. Set the Login Environment Variables on Windows

You can set the login environment variables for the session at command prompts, or you can set the login environment variables for the system or user by including them in the System Properties.

Set Login Environment Variables on the Command Line

At each command prompt, enter one of these commands:

set TRAFCI_PERL_JSERVER=<absolute-path-of-JavaServer.jar>
set TRAFCI_PYTHON_JSERVER=<absolute-path-of-Jython.jar>
set TRAFCI_PERL_JSERVER_PORT=<portnumber>

7.1.2. Set Login Environment Variables in the System Properties

  1. Right-click the Computer icon on your desktop, and then select Properties:

    Select computer properties

  2. In the Control Panel, click the Advanced system settings.

  3. In the System Properties dialog box, click the Advanced tab.

  4. Click the Environment Variables button:

    Click Environment Variables button

  5. In the Environment Variables dialog box, click New under System or User variables, whichever you prefer.

    Environment Variables dialog box

  6. In the New System Variable (or New User Variable) dialog box, type the name of the login environment variable for the Variable Name and the required value for the Variable Value, and then click OK:

    New System Variable dialog box

  7. Verify that the environment variable appears under System or User variables.

  8. Repeat Step 5 to Step 7 for each login environment variable.

  9. After adding all three environment variables, click OK in the Environment Variables and System Properties dialog boxes to accept the changes.

7.1.3. Set the Login Environment Variables on Linux or UNIX

You can set the login environment variables for the session at command prompts, or you can set the login environment variables for each user by including the variables in the user profile on a Linux or UNIX client workstation.

Set Login Environment Variables on the Command Line

At each command prompt in any shell except the C shell, enter one of these commands:

export TRAFCI_PERL_JSERVER=<absolute-path-of-JavaServer.jar>
export TRAFCI_PYTHON_JSERVER=<absolute-path-of-Jython.jar>
export TRAFCI_PERL_JSERVER_PORT=<portnumber>

At each command prompt in the C shell, enter one of these commands:

setenv TRAFCI_PERL_SERVER=<absolute-path-of-JavaServer.jar>
setenv TRAFCI_PYTHON_JSERVER=<absolute-path-of-Jython.jar>
setenv TRAFCI_PERL_JSERVER_PORT=<portnumber>
Setting Login Environment Variables in the User Profile

To set the login environment variables in the user profile:

  1. Open the user profile (.profile or .bash_profile for the Bash shell) in the $HOME directory.

    Example

    vi .profile
  2. Add these export commands (or setenv commands for the C shell) to the user profile.

    Example

    export TRAFCI_PERL_JSERVER=<absolute-path-of-JavaServer.jar>
    export TRAFCI_PYTHON_JSERVER=<absolute-path-of-Jython.jar>
    export TRAFCI_PERL_JSERVER_PORT=<portnumber>
  3. To activate the changes, either log out and log in again or execute the user profile.

    Example

    . .profile

7.2. Perl and Python Wrapper Scripts

The Perl or Python wrapper scripts enable you to run SQL statements and script files using a single connection or multiple connections within Perl or Python programs. The Perl wrapper script is trafci.pl, and the Python wrapper script is trafci.py. By default, these wrapper scripts are located in the bin directory:

Operating System Directory

Windows

<trafci-installation-directory>\Trafodion Command Interface\bin

Linux/Unix

<trafci-installation-directory>/trafci/bin

trafci-installation-directory is the directory where you installed the trafci software files.

7.3. Launch trafci From the Perl or Python Command Line

You can launch the Perl or Python wrapper scripts as shown below:

Language Launch Command Example

Perl

perl trafci.pl <perl-script-filename>
> perl trafci.pl example.pl

Python

python trafci.py <python-script-filename>
> python trafci.py example.py

7.3.1. Example Perl Program (sample.pl)

Alternatively, copy and paste the following code into a file named sample.pl:

use lib 'C:\\Program Files (x86)\\Apache Software Foundation\\Trafodion Command Interface\\lib\\perl';
use Session;

# create a new session
$sess = Session->new();

# connect to the database
$sess->connect("user1","password","16.123.456.78","23400");

$retval=$sess->execute(" set schema TRAFODION.CI_SAMPLE ");
print $retval;

# Execute sample queries
$retval=$sess->execute("select * from employee"); print $retval;
$retval=$sess->execute("get statistics"); print $retval;

# disconnect from the database
print "\n\nSession 1: Disconnecting first session. \n\n";
$sess->disconnect();

7.3.2. Example Python Program (sample.py)

Alternatively, copy and paste the following code into a file named sample.py:

import os import sys

## Modify this path
sys.path.append("C:\\Program Files (x86)\\Apache Software Foundation\\Trafodion Command Interface\\lib\\python")
import Session

# create a new session
sess = Session.Session()

# Connect to the database
x=sess. connect ("user1","password","16.123.456.78","23400")

# Execute sample queries

# execute takes the query string as argument
setSchema = "set schema TRAFODION.CI_SAMPLE"
selectTable = "select * from employee"
getStats = "get statistics"

#Contruct a list of SQL statements to be executed
queryList = [setSchema, selectTable, getStats] print "\n";

for query in queryList:
   print sess.execute (query)

# disconnect the session
sess.disconnect()
del sess
sess=None

8. Commands

TrafCI supports these commands in the command-line interface or in script files that you run from the command-line interface.

Command Description Documentation
@

Runs the SQL statements and interface commands contained in a specified script file.

@ Command

/

Runs the previously executed SQL statement.

/ Command

ALIAS

Maps a string to any interface or SQL command.

ALIAS Command

CLEAR

Clears the command console so that only the prompt appears at the top of the screen.

CLEAR Command

CONNECT

Creates a new connection to the Trafodion database from a current or existing TrafCI session.

CONNECT Command

DELAY

Allows the TrafCI session to be in sleep mode for the specified interval.

DELAY Command

DISCONNECT

Terminates the connection to the Trafodion database.

DISCONNECT Command

ENV

Displays attributes of the current TrafCI session.

ENV Command

EXIT

Disconnects from and exits the command-line interface.

EXIT Command

FC

Edits and re-executes a previous command. This command is restricted to the command-line interface and is disallowed in script files.

FC Command

GET STATISTICS

Returns formatted statistics for the last executed SQL statement.

GET STATISTICS Command

GOTO

Jumps to a point the command history specified by the LABEL Command.

GOTO Command

HELP

Displays help text for the interface commands.

HELP Command

HISTORY

Displays recently executed commands.

HISTORY Command

IF&8230;THEN

Allows the conditional execution of actions specified within the IF…THEN conditional statement.

IF…THEN Command

LABEL

Marks a point in the command history that you can jump to by using the GOTO Command.

LABEL Command

LOCALHOST

Executes client machine commands.

LOCALHOST Command

LOG

Logs commands and output from TrafCI to a log file.

LOG Command

OBEY

Runs the SQL statements and interface commands contained in a specified script file.

OBEY Command

PRUN

Runs script files in parallel.

PRUN Command

QUIT

Disconnects from and exits TrafCI.

QUIT Command

RECONNECT

Creates a new connection to the Trafodion database using the login credentials of the last successful connection.

RECONNECT Command

REPEAT

Re-executes a command.

REPEAT Command

RESET LASTERROR

Resets the last error code to 0.

RESET LASTERROR Command

RESET PARAM

Clears all parameter values or a specified parameter value in the current session.

RESET PARAM Command

RUN

Runs the previously executed SQL statement.

RUN Command

SAVEHIST

Saves the session history in a user-specified file.

SAVEHIST Command

SESSION

Displays attributes of the current TrafCI session.

SESSION Command

SET COLSEP

Sets the column separator and allows you to control the formatting of the result displayed for SQL queries.

SET COLSEP Command

SET FETCHSIZE

Changes the default fetchsize used by JDBC.

SET FETCHSIZE Command

SET HISTOPT

Sets the history option and controls how commands are added to the history buffer.

SET HISTOPT Command

SET IDLETIMEOUT

Sets the idle timeout value for the current session.

SET IDLETIMEOUT

SET LIST_COUNT

Sets the maximum number of rows to be returned by SELECT statements that are executed after this command.

SET LIST_COUNT Command

SET MARKUP

Sets the markup format and controls how results are displayed by TrafCI.

SET MARKUP Command

SET PARAM

Sets a parameter value in the current session.

SET PARAM Command

SET PROMPT

Sets the prompt of the current session to a specified string or to a session variable.

SET PROMPT Command

SET SQLPROMPT

Sets the SQL prompt of the current session to a specified string. The default is SQL.

SET SQLPROMPT Command

SET SQLTERMINATOR

Sets the SQL statement terminator of the current session to a specified string. The default is a semicolon (;).

SET SQLTERMINATOR Command

SET STATISTICS

Automatically retrieves the statistics information for a query being executed.

SET STATISTICS Command

SET TIME

Causes the local time of the client workstation to be displayed as part of the interface prompt.

SET TIME Command

SET TIMING

Causes the elapsed time to be displayed after each SQL statement executes.

SET TIMING Command

SHOW ACTIVITYCOUNT

Functions as an alias of SHOW RECCOUNT Command.

SHOW ACTIVITYCOUNT Command

SHOW ALIAS

Displays all or a set of aliases available in the current TrafCI session.

SHOW ALIAS Command

SHOW ALIASES

Displays all the aliases available in the current TrafCI session.

SHOW ALIASES Command

SHOW CATALOG

Displays the current catalog of the TrafCI session.

SHOW CATALOG Command

SHOW COLSEP

Displays the value of the column separator for the current TrafCI session.

SHOW COLSEP Command

SHOW ERRORCODE

Functions as an alias for the SHOW LASTERROR Command.

SHOW ERRORCODE Command

SHOW FETCHSIZE

Displays the fetch size value for the current TrafCI session.

SHOW FETCHSIZE Command

SHOW HISTOPT

Displays the value that has been set for the history option of the current setting.

SHOW HISTOPT Command

SHOW IDLETIMEOUT

Displays the idle timeout value of the current session.

SHOW IDLETIMEOUT Command

SHOW LASTERROR

Displays the last error of the statement that was executed.

SHOW LASTERROR Command

SHOW LIST_COUNT

Displays the maximum number of rows to be returned by SELECT statements in the current session.

SHOW LIST_COUNT Command

SHOW MARKUP

Displays the value that has been set for the markup option for the current TrafCI session.

SHOW MARKUP Command

SHOW PARAM

Displays the parameters that are set in the current session.

SHOW PARAM Command

SHOW PREPARED

Displays the prepared statements in the current TrafCI session.

SHOW PREPARED Command

SHOW RECCOUNT

Displays the record count of the previous executed SQL statement.

SHOW RECCOUNT Command

SHOW REMOTEPROCESS

Displays the process name of the DCS server that is handling the current connection.

SHOW REMOTEPROCESS Command

SHOW SCHEMA

Displays the current schema of the TrafCI session.

SHOW SCHEMA Command

SHOW SESSION

Displays attributes of the current TrafCI session.

SHOW SESSION Command

SHOW SQLPROMPT

Displays the value of the SQL prompt for the current session.

SHOW SQLPROMPT Command

SHOW SQLTERMINATOR

Displays the SQL statement terminator of the current session.

SHOW SQLTERMINATOR Command

SHOW STATISTICS

Displays if statistics has been enabled or disabled for the current session.

SHOW STATISTICS Command

SHOW TIME

Displays the setting for the local time in the SQL prompt.

SHOW TIME Command

SHOW TIMING

Displays the setting for the elapsed time.

SHOW TIMING Command

SPOOL

Logs commands and output from TrafCI to a log file.

SPOOL Command

VERSION

Displays the build versions of the platform, database connectivity services, JDBC Type 4 Driver, and TrafCI.

VERSION Command

8.1. @ Command

The @ command executes the SQL statements and interface commands contained in a specified script file. The @ command is executed the same as the OBEY command. For more information on syntax and considerations, OBEY Command.

8.1.1. Syntax

@{script-file | wild-card-pattern} [(section-name)]
  • script-file

    is the name of an ASCII text file that contains SQL statements, interface commands, and comments. If the script file exists outside the local directory where you launch TrafCI (by default, the bin directory) specify the full directory path of the script file.

  • wild-card-pattern

    is a character string used to search for script files with names that match the character string. wild-card-pattern matches a string, depending on the operating system for case-sensitivity, unless you enclose it within double quotes. To look for similar values, specify only part of the characters of wild-card-pattern combined with these wild-card characters:

    *

    Use an asterisk () to indicate zero or more characters of any type. For example, *art matches SMART, ARTIFICIAL, and PARTICULAR.

    ?

    Use a question mark (?) to indicate any single character. For example, boo? matches BOOK and BOOT but not BOO or BOOTS.

  • (section-name)

    is the name of a section within the script-file to execute. If you specify section-name, the @ command executes the commands between the header line for the specified section and the header line for the next section (or the end of the script file). If you omit section-name, the @ command executes the entire script file. For more information, Section Headers.

8.1.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • Space is disallowed between the @ sign and the first character of the script name.

  • For additional considerations, see the OBEY Command.

8.1.3. Examples

  • This @ command runs the script file from the local directory (the same directory where you are running TrafCI):

    SQL> @ddl.sql
  • This @ command runs the script file in the specified directory on a Windows workstation:

     SQL> @c:\my_files\ddl.sql
  • This @ command runs the script file in the specified directory on a Linux or UNIX workstation:

    SQL> @./my_files/ddl.sql

8.2. / Command

The / command executes the previously executed SQL statement. This command does not repeat an interface command.

8.2.1. Syntax

/

8.2.2. Considerations

  • You must enter the command on one line.

  • The command does not require an SQL terminator.

8.2.3. Example

This / command executes the previously executed SELECT statement:

SQL> SELECT COUNT() FROM persnl.employee;

(EXPR)
--------------------
62

--- 1 row(s) selected.

`SQL>`/

(EXPR)
--------------------
62

--- 1 row(s) selected.

SQL>

8.3. ALIAS Command

The ALIAS command allows you to map a string to any interface or SQL command. The syntax of the interface or SQL command is checked only when the mapped string is executed. This command replaces only the first token of a command string, which allows the rest of the tokens to be treated as parameters.

8.3.1. Syntax

ALIAS value AS command SQL-terminator
  • value

    is a case-insensitive string without spaces. Value cannot be a command.

  • command

    is an command or SQL command.

  • SQL-terminator

    is the default terminator (;) or a string value defined for the statement terminator by the SET SQLTERMINATOR Command. For more information, see Set and Show the SQL Terminator.

8.3.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • The ALIAS command lasts only for the duration of the session.

  • An alias on an alias is not supported.

8.3.3. Examples

  • This command creates an alias named .OS to perform the LOCALHOST (LH) command:

    SQL> ALIAS .OS AS LH;
  • This command executes the new ALIAS with the ls option:

    SQL> .OS ls
    
    trafci-perl.pl trafci-python.py trafci.cmd trafci.pl trafci.py trafci.sh
  • This command creates an alias named .GOTO to perform the GOTO command:

    SQL> ALIAS .GOTO AS GOTO;
    SQL> .GOTO mylabel

    The GOTO statement executed, ignoring all commands until a 'LABEL MYLABEL' command is encountered.

  • This command creates an alias named USE to perform the SET SCHEMA operation, uses the alias to set the schema to TRAFODION.USR, and checks the current schema to verify that the alias worked correctly:

    SQL> ALIAS use AS "SET SCHEMA";
    SQL> use TRAFODION.USR;
    SQL> SHOW SCHEMA
    
    SCHEMA USR

8.4. CLEAR Command

The CLEAR command clears the interface window so that only the prompt appears at the top of the window. CLEAR does not clear the log file or reset the settings of the session.

8.4.1. Syntax

CLEAR

8.4.2. Considerations

  • You must enter the command on one line.

  • The CLEAR command does not require an SQL terminator.

8.4.3. Example

This CLEAR command clears the interface window:

SQL> CLEAR

After the CLEAR command executes, the interface window appears with only the prompt showing:

SQL>

8.5. CONNECT Command

The CONNECT command creates a new connection to the database from the current or existing TrafCI session.

8.5.1. Syntax

CONNECT [ username [ /password ][@hostname]]
  • username

    specifies the user name for logging in to the database platform.

    • If the user name is not specified, then TrafCI prompts for the user name.

    • If the user name contains spaces or special characters, such as a period (.), hyphen (-), or underscore (_), then put the name within double quotes. For example: "sq.user-1".

  • /password

    specifies the password of the user for logging in to the database platform.

    • If the password is not specified, then TrafCI prompts for the password.

    • If the password contains spaces or special characters, such as @ or a single quote ('), then put the password within double quotes. For example: "Tr@f0d!0n".

  • @hostname

    specifies the host name or IP address of the database platform to which you want the client to connect.

    • If the hostname is not specified, then the value is automatically used from the current TrafCI session.

    • If TrafCI was invoked with the -noconnect launch parameter, then you are prompted for a hostname value.

8.5.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If TrafCI was invoked with the -noconnect launch parameter, then TrafCI prompts you for the values.

  • If the user name or password contains space or special characters, then you must put the name or password within double quotes.

8.5.3. Examples

  • This command creates a new connection to the Trafodion database from the current or existing TrafCI session:

    SQL> CONNECT
    
    User Name: user1
    Password:
    
    Connected to Trafodion
  • This command creates a new connection to the Trafodion database from the current or existing TrafCI session:

    SQL> CONNECT user1/password
    
    Connected to Trafodion
  • This command creates a new connection to the Trafodion database from the current or existing TrafCI session:

    SQL> CONNECT user1/password@host0101
    
    Connected to Trafodion
  • This command creates a new connection to the Trafodion database from the current or existing TrafCI session:

    SQL> CONNECT user2
    
    Password:
    
    Connected to Trafodion

8.6. DELAY Command

The DELAY command allows the TrafCI session to be in sleep mode for the specified interval.

8.6.1. Syntax

DELAY time [sec[ond][s] | min[ute][s]]
  • time

    is an integer.

8.6.2. Considerations

  • If seconds or minutes are not specified, then the default is seconds.

  • The maximum delay limit is 3600 seconds. You can override this value by setting trafci.maxDelayLimit in _JAVA_OPTIONS. The unit is seconds for trafci.maxDelayLimit.

  • This command does not require an SQL terminator.

8.6.3. Examples

  • This DELAY command puts the TrafCI session to sleep for 5 seconds before executing the next command:

    SQL> DELAY 5 secs
    SQL> SHOW VIEWS
  • This DELAY command puts TrafCI session to sleep for 5 minutes before executing the next command, which is to exit the session:

    SQL> DELAY 5 mins
    SQL> EXIT

8.7. DISCONNECT Command

The DISCONNECT command terminates the connection from the database, not from TrafCI.

8.7.1. Syntax

DISCONNECT [WITH] [status] [IF {condition}]
  • status

    is any 1-byte integer. status is a shell return value, and the range of allowable values is platform dependent.

  • condition

    is the same as the condition parameter defined for the IF&8230;THEN Command. See Condition Parameter.

8.7.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • After you disconnect from the Trafodion database, you can still run these interface commands:

    ALIAS

    HELP

    SAVEHIST

    SET/SHOW SQLTERMINATOR

    CLEAR

    HISTORY

    SESSION

    SET/SHOW TIME

    CONNECT

    LABEL

    SET/SHOW COLSEP

    SET/SHOW TIMING

    DELAY

    LOCALHOST

    SET/SHOW HISTOPT

    SHOW ALIAS/ALIASES

    DISCONNECT

    LOG

    SET/SHOW IDLETIMEOUT

    SHOW SESSION

    ENV

    QUIT

    SET/SHOW MARKUP

    SPOOL

    EXIT

    REPEAT

    SET/SHOW PARAM

    VERSION

    FC

    RESET LASTERROR

    SET PROMPT

    GOTO

8.7.3. Examples

This command terminates the connection to the Trafodion database. You can connect to the Trafodion database by using the CONNECT and RECONNECT commands:

SQL> DISCONNECT

Session Disconnected. Please connect to the database by using
connect/reconnect command.

8.8. ENV Command

ENV displays attributes of the current TrafCI session. You can also use the SESSION and SHOW SESSION commands to perform the same function.

8.8.1. Syntax

ENV

8.8.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • ENV displays these attributes:

Attribute Description

COLSEP

Current column separator, which is used to control how query results are displayed. For more information, see SET COLSEP Command.

HISTOPT

Current history options, which controls how the commands are added to the history buffer. For more information, see SET HISTOPT Command.

IDLETIMEOUT

Current idle timeout value, which determines when the session expires after a period of inactivity. By default, the idle timeout is 30 minutes. For more information, see Set and Show Session Idle Timeout Value and SET IDLETIMEOUT Command.

LIST_COUNT

Current list count, which is the maximum number of rows that can be returned by SELECT statements. By default, the list count is all rows. For more information, see SET LIST_COUNT Command.

LOG FILE

Current log file and the directory containing the log file. By default, logging during a session is turned off. For more information, see Log Output, and LOG Command or SPOOL Command.

LOG OPTIONS

Current logging options. By default, logging during a session is turned off, and this attribute does not appear in the output. For more information, see the LOG Command or SPOOL Command.

MARKUP

Current markup option selected for the session. The default option is RAW. For more information, SET MARKUP Command.

PROMPT

Current prompt for the session. For example, the default is SQL>. For more information, Customize the Standard Prompt and SET PROMPT Command.

SCHEMA

Current schema. The default is USR. For more information, see Set and Show the Current Schema.

SERVER

Host name and port number that you entered when logging in to the database platform. For more information, see Log In to Database Platform.

SQLTERMINATOR

Current SQL statement terminator. The default is a semicolon (;). For more information, see Set and Show the SQL Terminator and SHOW SQLTERMINATOR Command.

STATISTICS

Current setting (on or off) of statistics. For more information, see the SET STATISTICS Command.

TIME

Current setting (on or off) of the local time as part of the prompt. When this command is set to on, military time is displayed. By default, the local time is off. For more information, see Customize the Standard Prompt and SET TIME Command.

TIMING

Current setting (on or off) of the elapsed time. By default, the elapsed time is off. For more information, see Display the Elapsed Time and SET TIMING Command.

USER

User name that you entered when logging in to the database platform. For more information, Log In to Database Platform.

8.8.3. Examples

  • This ENV command displays the attributes of the current session:

    SQL> ENV
    
    COLSEP           " "
    HISTOPT          DEFAULT [No expansion of script files]
    IDLETIMEOUT      0 min(s) [Never Expires]
    LIST_COUNT       0 [All Rows]
    LOG FILE         c:\session.txt
    LOG OPTIONS      APPEND,CMDTEXT ON
    MARKUP           RAW
    PROMPT           SQL>
    SCHEMA           SEABASE
    SERVER           sqws135.houston.host.com:23400
    SQLTERMINATOR    ;
    STATISTICS       OFF
    TIME             OFF
    TIMING           OFF
    USER             user1
  • This ENV command shows the effect of setting various session attributes:

    4:16:43 PM > ENV
    
    COLSEP           " "
    HISTOPT          DEFAULT [No expansion of script files]
    IDLETIMEOUT      30 min(s)
    LIST_COUNT       0 [All Rows]
    LOG              OFF
    MARKUP           RAW
    PROMPT           SQL>
    SCHEMA           SEABASE
    SERVER           sqws135.houston.host.com:23400
    SQLTERMINATOR    ;
    STATISTICS       OFF
    TIME             OFF
    TIMING           OFF
    USER             user1
    
    4:16:49 PM >

8.9. EXIT Command

The EXIT command disconnects from and exits TrafCI. EXIT can return a status code. If no status code is specified, then 0 (zero) is returned by default. In addition, a conditional statement can be appended to the command.

8.9.1. Syntax

EXIT [WITH] [status] [IF {condition}]
  • status

    is any 1-byte integer. status is a shell return value, and the range of allowable values is platform dependent.

  • condition

    is the same as the condition parameter defined for the IF&8230;THEN Command. See Condition Parameter.

8.9.2. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.9.3. Examples

  • This command disconnects from and exits TrafCI, which disappears from the screen:

    SQL> EXIT
  • In a script file, the conditional exit command causes the script file to quit running and disconnect from and exit TrafCI when the previously run command returns error code 4082:

    LOG c:\errorCode.log
    SELECT * FROM employee;
    EXIT IF errorcode=4082
    LOG OFF

    These results are logged when error code 4082 occurs:

    SQL> SELECT * FROM employee;
    
    **** ERROR[4082] Table, view or stored procedure TRAFODION.USR.EMPLOYEE does not exist or is inaccessible.
    
    SQL> EXIT IF errorcode=4082
  • The following two examples are equivalent:

    SQL> EXIT -1 IF LASTERROR <> 0
    SQL> EXIT WITH -1 IF LASTERROR != 0
  • This example exits TrafCI if the last error code is equal to 4082:

    SQL> EXIT WITH 82 IF LASTERROR == 4082
    SQL> EXIT -- default status is 0

8.10. FC Command

The FC command allows you to edit and reissue a command in the history buffer of an TrafCI session. You can display the commands in the history buffer by using the HISTORY command. For information about the history buffer, see the HISTORY Command.

8.10.1. Syntax

FC [text | [-]number]
  • text

    is the beginning text of a command in the history buffer. Case is not significant in matching the text to a command.

  • number

    is either a positive integer that is the ordinal number of a command in the history buffer or a negative integer that indicates the position of a command relative to the most recent command.

Without text or number, FC retrieves the most recent command.

8.10.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • You cannot execute this command in a script file. You can execute this command only at a command prompt.

  • As each line of the command is displayed, you can modify the line by entering these editing commands (in uppercase or lowercase letters) on the line below the displayed command line:

Edit Command Description

D

Deletes the character immediately above the letter D. Repeat to delete more characters.

`I`characters

Inserts characters in front of the character immediately above the letter I.

`R`characters

Replaces existing characters one-for-one with characters, beginning with the character immediately above the letter R.

characters

Replaces existing characters one-for-one with characters, beginning with the first character immediately above characters. `characters` must begin with a non-blank character.

To specify more than one editing command on a line, separate the editing commands with a double slash (//). The end of a line terminates an editing command or a set of editing commands.

After you edit a line of the command, TrafCI displays the line again and allows you to edit it again. Press Enter without specifying editing commands to stop editing the line. If that line is the last line of the command, pressing Enter executes the command.

To terminate a command without saving changes to the command, use the double slash (//), and then press Enter.

8.10.3. Examples

  • Re-execute the most recent command that begins with SH:

    SQL> FC SH
    SQL> SHOW SCHEMA
    ....

    Pressing Enter executes the SHOW SCHEMA command and displays the current schema, PERSNL:

    SQL> FC SH
    SQL> SHOW SCHEMA
    ....
    
    SCHEMA PERSNL
    
    SQL>
  • Correct an SQL statement that you entered incorrectly by using the delete (D) editing command:

    SQL> SELECT * FROM persnl.employee;
    
    *** ERROR[15001] A syntax error occurred at or before:
    SELECCT * FROM persnl.employee;
          ^
    SQL> FC
    SQL> SELECCT * FROM persnl.employee;
    ....     d
    SQL>SELECT * FROM persnl.employee;
    ....

    Pressing Enter executes the corrected SELECT statement.

  • Correct an SQL statement that you entered incorrectly by using more than one editing command:

    SQL> SELT * FROMM persnl.employee;
    
    *** ERROR[15001] A syntax error occurred at or before:
    SELT * FROMM persnl.employee;
       ^
    SQL> FC
    SQL> SELT *  FROMM persnl.employee;
    ....    iEX//   d
    SQL> SELECT * FROM persnl.employee;
    ....

    Pressing Enter executes the corrected SELECT statement.

  • Modify a previously executed statement by replacing a value in the WHERE clause with another value:

    SQL> SELECT first_name, last_name
    +> FROM persnl.employee
    +> WHERE jobcode=111;
    
    --- 0 row(s) selected.
    
    SQL> FC
    SQL> SELECT first_name, last_name
    ....
    SQL> FROM persnl.employee
    ....
    SQL> WHERE jobcode=111;
                       450
    ....
    SQL> WHERE jobcode=450;
    ....

    Pressing Enter lists the first and last names of all of the employees whose job code is 450.

  • Modify a previously executed statement by replacing a column name in the select list with another column name:

    SQL> SELECT first_name, last_name
    +> FROM persnl.employee
    +> WHERE jobcode=450;
    
    FIRST_NAME      LAST_NAME
    --------------- --------------------
    MANFRED         CONRAD
    WALTER          LANCASTER
    JOHN            JONES
    KARL            HELMSTED
    THOMAS          SPINNER
    
    --- 5 row(s) selected.
    
    SQL> FC
    SQL> SELECT first_name, last_name
    ....        R   empnum,
    SQL> SELECT     empnum, last_name
    ....
    
    SQL> FROM persnl.employee
    ....
    
    SQL> WHERE jobcode=450;
    ....

    Pressing Enter lists the employee number and last names of all employees whose job code is 450:

    EMPNUM LAST_NAME
    ------ --------------------
       180 CONRAD
       215 LANCASTER
       216 JONES
       225 HELMSTED
       232 SPINNER
    
    --- 5 row(s) selected.
    SQL>

8.11. GET STATISTICS Command

The GET STATISTICS command returns formatted statistics for the last executed SQL statement.

8.11.1. Syntax

GET STATISTICS

8.11.2. Description of Returned Values

Value Description
Records Accessed

Number of rows returned by disk process to EID (Executor In Disk process).

Records Used

Number of rows returned by EID after selection.

Disk IOs

Number of actual disk IOs done by disk process.

Message Count

Number of messages sent/received between file system and disk process.

Message Bytes

Number of message bytes sent/received between file system and disk process.

Lock Escl

Number of lock escalations.

Lock Wait

Number of lock waits.

Disk Process Busy Time

CPU time for disk process processes for the specified table.

8.11.3. Considerations

The command requires an SQL terminator.

8.11.4. Examples

SQL> SELECT * FROM job;

JOBCODE JOBDESC
------- ------------------
100     MANAGER
1234    ENGINEER
450     PROGRAMMER
900     SECRETARY
300     SALESREP
500     ACCOUNTANT
400     SYSTEM ANALYST
250     ASSEMBLER
420     ENGINEER
600     ADMINISTRATOR
200     PRODUCTION SUPV

--- 11 row(s) selected.

SQL> GET STATISTICS;

Start Time         21:45:34.082329
End Time           21:45:34.300265
Elapsed Time       00:00:00.217936
Compile Time       00:00:00.002423
Execution Time     00:00:00.218750


Table Name         Records  Records Disk Message Message Lock   Lock Disk Process
                   Accessed Used    I/Os Count   Bytes   Escl   Wait Busy Time
TRAFODION.TOI.JOB         2            2       0       4 15232     0    0     363

--- SQL operation complete.

8.12. GOTO Command

The GOTO command allows you to jump to a designated point in the command history. The point in the command history is designated by a LABEL command. All commands executed after a GOTO statement are ignored until the specified label is set. To set a label, use the LABEL Command.

8.12.1. Syntax

GOTO {label}
  • label

    is a string of characters without quotes and spaces, or a quoted string.

8.12.2. Considerations

  • You must enter the command on one line.

  • The GOTO command cannot currently jump back in the command history; it is a forward-only command.

8.12.3. Examples

These examples show the use of the GOTO and LABEL commands:

SQL> GOTO ViewManagers
SQL> SELECT  FROM Employees; -- skipped
SQL> SHOW RECCOUNT;          -- skipped
SQL> LABEL ViewManagers
SQL> SELECT  FROM Managers;
SQL> GOTO "View Customers"
SQL> SELECT  FROM Invoices;  -- skipped
SQL> LABEL "View Customers"
SQL> SELECT  FROM Customers;

8.13. HELP Command

The HELP command displays help text for the commands. See Commands for a descriptions of the commands.

8.14. Syntax

HELP [command-name]

command-name

is the name of a command.

  • If you do not specify a command, then TrafCI returns a list of all commands.

  • If you specify SET, then TrafCI returns a list of all SET commands.

  • If you specify SHOW, then TrafCI returns a list of all SHOW commands.

8.14.1. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.14.2. Examples

  • This HELP command lists all the interface commands that are supported:

    SQL> HELP
  • This HELP command lists all the SET commands that are supported:

    SQL> HELP SET
  • This HELP command lists all the SHOW commands that are supported:

    SQL> HELP SHOW
  • This HELP command shows help text for SET IDLETIMEOUT:

    SQL> HELP SET IDLETIMEOUT

8.15. HISTORY Command

The HISTORY command displays recently executed commands, identifying each command by a number that you can use to re-execute or edit the command.

8.15.1. Syntax

HISTORY [number]
  • number

    is the number of commands to display. The default number is 10. The maximum number is 100.

8.15.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • You can use the FC command to edit and re-execute a command in the history buffer, or use the REPEAT command to re-execute a command without modifying it. See FC Command or REPEAT Command.

8.15.3. Example

Display the three most recent commands and use FC to redisplay one:

SQL> HISTORY 3

14> SET SCHEMA SALES;
15> SHOW TABLES
16> SHOW VIEWS

SQL> FC 14

SQL> SET SCHEMA sales
....

Now you can use the edit capabilities of FC to modify and execute a different SET SCHEMA statement.

8.16. IF…THEN Command

IF…THEN statements allow for the conditional execution of actions. If the condition is met, the action is executed; otherwise, no action is taken.

8.16.1. Syntax

IF {condition} THEN {action} {SQL-terminator}
  • condition

    The condition parameter (condition) is a Boolean statement structured as follows:

    ( {variable-name | value} {operator} {variable-name | value}
  • variable-name

    is one of:

    { LASTERROR
    | RECCOUNT
    | ACTIVITYCOUNT
    | ERRORCODE
    | [%]any ENV variable | any SQL parameter
    }
  • value

    is any integer or a quoted string, where the quoted string is any non-quote character. \ is the optional escape character.

  • operator

    is one of:

    Operator Meaning
    == | =

    equal to

    <> | != | ~= | ^=

    not equal to

    >

    greater than

    >=

    greater than or equal to

    <

    less than

    <=

    less than or equal to

  • action

    The action parameter (action) is any interface or SQL command.

  • SQL Terminator

    The SQL terminator (SQL-terminator) is the default terminator (;) or a string value defined for the statement terminator by the SET SQLTERMINATOR Command. See Set and Show the SQL Terminator.

8.16.2. Considerations

  • IF…THEN is itself an action. Thus, nested IF…THEN statements are allowed.

  • An action must end with the SQL terminator, even if the action is an interface command.

8.16.3. Examples

These commands show multiple examples of IF…THEN statements:

SQL> INVOKE employees
SQL> -- ERROR 4082 means the table does not exist
SQL> IF ERRORCODE != 4082 THEN GOTO BeginPrepare
SQL> CREATE TABLE employees(ssn INT PRIMARY KEY NOT NULL NOT DROPPABLE, fname VARCHAR(50), lname VARCHAR(50), hiredate DATE DEFAULT CURRENT_DATE);
SQL> LABEL beginprepare
SQL> PREPARE empSelect FROM
+> SELECT * FROM
+> employees
+> WHERE SSN=?empssn;
SQL> IF user == "alice" THEN SET PARAM ?empssn 987654321;
SQL> IF %user == "bob" THEN SET PARAM ?empssn 123456789;
SQL> EXECUTE empselect
SQL> IF user == "alice" THEN
+> IF activitycount == 0 THEN GOTO insertalice;
SQL> IF user == "bob" THEN IF activitycount == 0 THEN GOTO insertbob;
SQL> EXIT
SQL> LABEL insertalice
SQL> INSERT INTO employees(ssn, fname, lname) VALUES(987654321, 'Alice', 'Smith');
SQL> EXIT
SQL> LABEL insertbob
SQL> INSERT INTO employees(ssn, fname, lname) VALUES(123456789, 'Bob', 'Smith');
SQL> EXIT

8.17. LABEL Command

The LABEL command marks a point in the command history that you can jump to by using the GOTO command. For more information, see the GOTO Command.

8.17.1. Syntax

LABEL {label}
  • label

    is a string of characters without quotes and spaces, or a quoted string.

8.17.2. Considerations

You must enter the command on one line.

8.17.3. Examples

  • This command creates a label using a string of characters:

    SQL> LABEL MyNewLabel
  • This command creates a label using a quoted string:

    SQL> LABEL "Trafodion Label"

8.18. LOCALHOST Command

The LOCALHOST command allows you to execute client machine commands.

8.18.1. Syntax

LOCALHOST | LH <client M/C commands>

8.18.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • The LOCALHOST command has a limitation. When input is entered for the operating system commands (for example, date, time, and cmd), the input is not visible until you hit the enter key.

  • If the SET TIMING is set to ON, the elapsed time information is displayed.

8.18.3. Examples

  • If you are using a Windows system, dir lists the contents of the directory name. Similarly, if you are on a UNIX system you enter LOCALHOST LS to display the contents of the folder.

    SQL> LOCALHOST dir
    
    Volume in drive C is E-Client
    Volume Serial Number is DC4F-5B3B
    
    Directory of c:\Program Files (x86)\Apache Software Foundation\Trafodion Command
    
    Interface\bin 05/11/2105 01:17 PM <DIR>
    05/11/2105 01:17 PM <DIR>
    05/16/2105 09:47 AM      1,042 trafci-perl.pl
    05/16/2105 09:47 AM      1,017 trafci-python.pl
    05/16/2105 09:47 AM        752 trafci.cmd
    05/16/2105 09:47 AM      1,416 trafci.pl
    05/16/2105 09:47 AM      2,388 trafci.py
    05/16/2105 09:47 AM      3,003 trafci.sh
              6 Files(s) 19,491 bytes
              2 Dir (s) 57,686,646,784 bytes free
    
    SQL> LH mkdir c:\trafci -- Will create a directory c:\trafci on your local machine.
  • This command displays the elapsed time information because the SET TIMING command is set to ON:

    SQL> SET TIMING ON
    SQL> LOCALHOST ls
    
    trafci-perl.pl
    trafci-python.py
    trafci.cmd
    trafci.pl
    trafci.py
    trafci.sh
    
    Elapsed :00:00:00.078

8.19. LOG Command

The LOG command logs the entered commands and their output from TrafCI to a log file. If this is an obey script file, then the command text from the obey script file is shown on the console.

8.19.1. Syntax

LOG { ON [CLEAR, QUIET, CMDTEXT {ON | OFF}]
    | log-file [CLEAR, QUIET, CMDTEXT {ON | OFF}]
    | OFF
    }
  • ON

    starts the logging process and records information in the sqlspool.lst file in the bin directory.

  • CLEAR

    instructs TrafCI to clear the contents of the sqlspool.lst file before logging new information to the file.

  • QUIET

    specifies that the command text is displayed on the screen, but the results of the command are written only to the log file and not to the screen.

  • CMDTEXT ON

    specifies that the command text and the log header are displayed in the log file.

  • CMDTEXT OFF

    specifies that the command text and the log header are not displayed in the log file.

  • log-file

    is the name of a log file into which TrafCI records the entered commands and their output. If you want the log file to exist outside the local directory where you launch TrafCI (by default, the bin directory), specify the full directory path of the log file. The log file does not need to exist, but the specified directory must exist before you execute the LOG command.

  • log-file CLEAR

    instructs TrafCI to clear the contents of the specified log-file before logging new information to the file.

  • OFF

    stops the logging process.

8.19.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • Use a unique name for each log file to avoid writing information from different TrafCI sessions into the same log file.

8.19.3. Examples

  • This command starts the logging process and records information to the sqlspool.lst file in the bin directory:

    SQL> LOG ON
  • This command starts the logging process and appends new information to an existing log file, persnl_updates.log, in the local directory (the same directory where you are running TrafCI):

    SQL> LOG persnl_updates.log
  • This command starts the logging process and appends new information to a log file, sales_updates.log, in the specified directory on a Windows workstation:

    SQL> LOG c:\log_files\sales_updates.log
  • This command starts the logging process and appends new information to a log file, sales_updates.log, in the specified directory on a Linux or UNIX workstation:

    SQL> LOG ./log_files/sales_updates.log
  • This command starts the logging process and clears existing information from the log file before logging new information to the file:

    SQL> LOG persnl_ddl.log CLEAR
  • This command start the logging process, clears existing information from the log file, and specifies that the command text and log header is not displayed in the log file:

    SQL> LOG c:\temp\a.txt clear, CMDTEXT OFF
    SQL> (SELECT * FROM trafodion.toi.job
    +>;
    
    JOBCODE JOBDESC
    ------- ------------------
    100     MANAGER
    450     PROGRAMMER 900 SECRETARY
    300     SALESREP
    500     ACCOUNTANT
    400     SYSTEM ANALYST
    250     ASSEMBLER
    420     ENGINEER
    600     ADMINISTRATOR
    200     PRODUCTION SUPV
    
    --- 10 row(s) selected.
    
    SQL> log off
    
    Output of c:\temp\a.txt
    
    JOBCODE JOBDESC
    ------- ------------------
    100     MANAGER
    450     PROGRAMMER 900 SECRETARY
    300     SALESREP
    500     ACCOUNTANT
    400     SYSTEM ANALYST
    250     ASSEMBLER
    420     ENGINEER
    600     ADMINISTRATOR
    200     PRODUCTION SUPV
    
    --- 10 row(s) selected
  • This command start the logging process, clears existing information from the log file, specifies that no output appears on the console window, and the quiet option is enabled:

    SQL> LOG c:\temp\b.txt CLEAR, CMDTEXT OFF, QUIET
    SQL> SELECT
    +> FROM trafodion.toi.job; +
    SQL> LOG OFF
    
    Output of c:\temp\b.txt
    
    JOBCODE JOBDESC
    ------- ------------------
    100     MANAGER
    450     PROGRAMMER 900 SECRETARY
    300     SALESREP
    500     ACCOUNTANT
    400     SYSTEM ANALYST
    250     ASSEMBLER
    420     ENGINEER
    600     ADMINISTRATOR
    200     PRODUCTION SUPV
    
    --- 10 row(s) selected

    This command stops the logging process:

    SQL> LOG OFF

For more information, see Log Output.

8.20. OBEY Command

The OBEY command executes the SQL statements and interface commands of a specified script file or an entire directory. This command accepts a single filename or a filename with a wild-card pattern specified. Executing the OBEY command without optional parameters prompts you to enter a filename. If a filename is not specified, then *.sql is used.

8.20.1. Syntax

OBEY {script-file | wild-card-pattern} [(section-name)]
  • script-file

    is the name of an ASCII text file that contains SQL statements, interface commands, and comments. If the script file exists outside the local directory where you launch TrafCI (by default, the bin directory), specify the full directory path of the script file.

  • wild-card-pattern

    is a character string used to search for script files with names that match the character string. wild-card-pattern matches a string, depending on the operating system for case-sensitivity, unless you enclose it within double quotes. To look for similar values, specify only part of the characters of wild-card-pattern combined with these wild-card characters:

  • (section-name)

    is the name of a section within the script-file to execute. If you specify section-name, the OBEY command executes the commands between the header line for the specified section and the header line for the next section (or the end of the script file). If you omit section-name, the OBEY command executes the entire script file. For more information, see Section Headers.

8.20.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • Put a space between OBEY and the first character of the file name.

  • You can execute this command in a script file.

  • Before putting dependent SQL statements across multiple files, consider the order of the file execution. If a directory is not passed to the OBEY command, the file or wild card is assumed to be in the current working directory.

  • If the (*) is issued in the OBEY command, all files are executed in the current directory. Some of the files in the directory could be binary files. The OBEY command tries to read those binary files and junk or invalid characters are displayed on the console. For example, this command causes invalid characters to be displayed on the console:

    SQL> OBEY C:\trafci\bin\
  • OBEY detects recursive obey files (for example, an SQL file that calls OBEY on itself) and prevents infinite loops using a max depth environment variable. If no variable is passed to the JVM, the default depth is set to 10. To change this depth (for example to a value of 20), pass a Java environment variable as follows:

    -Dtrafci.obeydepth=20

8.20.3. Examples

  • This OBEY command runs the script file from the local directory (the same directory where you are running TrafCI):

    SQL> OBEY ddl.sql
  • This OBEY command runs the script file in the specified directory on Windows.

    SQL> OBEY c:\my_files\ddl.sql
  • This OBEY command runs the script file in the specified directory on a Linux or UNIX workstation:

    SQL> OBEY ./my_files/ddl.sql
  • This sample file contains sections to be used in conjunction with the OBEY command:

    ?section droptable
    DROP TABLE course ;
    
    ?section create
    CREATE TABLE course ( cno VARCHAR(3) NOT NULL
                        , cname VARCHAR(22) NOT NULL
                        , cdescp VARCHAR(25) NOT NULL
                        , cred INT
                        , clabfee NUMERIC(5,2)
                        , cdept VARCHAR(4) NOT NULL
                        , PRIMARY KEY (cno)
                        ) ;
    
    ?section insert
    INSERT INTO course VALUES ('C11', 'Intro to CS','for Rookies',3, 100, 'CIS') ;
    INSERT INTO course VALUES ('C22', 'Data Structures','Very Useful',3, 50, 'CIS') ;
    INSERT INTO course VALUES ('C33', 'Discrete Mathematics', 'Absolutely Necessary',3, 0,'CIS') ;
    
    ?section select
    SELECT * FROM course ;
    
    ?section delete
    PURGEDATA course;

    To run only the commands in section create, execute the following:

    SQL> OBEY C:\Command Interfaces\course.sql (create)
    
    SQL> ?section create
    SQL> CREATE TABLE course
    +>(
    +> cno VARCHAR(3) NOT NULL,
    +> cname VARCHAR(22) NOT NULL,
    +> cdescp VARCHAR(25) NOT NULL,
    +> cred INT,
    +> clabfee NUMERIC(5,2),
    +> cdept VARCHAR(4) NOT NULL,
    +> PRIMARY KEY (cno)
    +>) ;
    
    --- SQL Operation complete.

    To run only the commands in the insert section, execute the following:

    SQL> OBEY C:\Command Interfaces\course.sql (insert)
    
    SQL> ?section insert
    SQL> INSERT INTO course VALUES
    +> ('C11', 'Intro to CS','For Rookies',3, 100, 'CIS');
    
    --- 1 row(s) inserted.
    
    SQL> INSERT INTO course VALUES
    +> ('C22', 'Data Structures','Very Useful',3, 50, 'CIS');
    
    --- 1 row(s) inserted.
    
    SQL> INSERT INTO course VALUES
    +> ('C33', 'Discrete Mathematics', 'Absolutely Necessary',3, 0, 'CIS');
    
    --- 1 row(s) inserted.
  • This command executes all files with .sql extension:

    SQL> OBEY c:\trafci\.sql;
    SQL> OBEY c:\trafci
  • This command executes all files beginning with the word "script" and contains one character after the word script and ends with .sql extension. For example: script1.sql, script2.sql, scriptZ.sqland so on.

    SQL> OBEY C:\trafci\script?.sql
  • This command executes all files that contain the word "test". This includes the files that do not end with .sql extension.

    SQL> OBEY C:\trafci\test
  • This command executes all files that begin with the word "script" and contains one character after the word "script" and ends with an extension prefixed by a dot. For example: script1.sql, script2.bat, scriptZ.txt, and so on.

    SQL> OBEY C:\trafci\script?.
  • This command executes all files that have .txt extension in the current directory, the directory in which the command interface was launched.

    SQL> OBEY .txt;
  • This command prompts the user to enter the script filename or a pattern. The default value is *.sql.

    SQL> OBEY;
    
    Enter the script filename [.sql]:

8.21. PRUN Command

The PRUN command runs script files in parallel.

8.21.1. Syntax

PRUN { -d | -defaults }

PRUN
[ { -sd | -scriptsdir } scriptsdirectory ]
[ { -e  | -extension } filedirectory ]
[ { -ld | -logsdir } log-directory ]
[ { -o  | -overwrite } {Y | N}
[ { -c  | -connections } num ]
  • -d | -defaults

    Specify this option to have PRUN use these default settings:

    Parameter Default Setting

    -sd | -scriptsdir

    PRUN searches for the script files in the same directory as the trafci.sh or trafci.cmd file (trafci-installation-directory/trafci/bin or trafci-installation-directory\trafci\bin).

    -e | -extension

    The file extension is .sql.

    -ld | -logsdir

    PRUN places the log files in the same directory as the script files.

    -o | -overwrite

    No overwriting occurs. PRUN keeps the original information in the log files and appends new information at the end of each file.

    -c | -connections

    PRUN uses two connections.

  • {-sd | -scriptsdir} scripts-directory

    In this directory, PRUN processes every file with the specified file extension. If you do not specify a directory or if you specify an invalid directory, an error message occurs, and you are prompted to reenter the directory. Before running PRUN, verify that this directory contains valid script files.

  • {-e | -extension} file-extension

    Specify the file extension of the script files. The default is .sql.

  • {-ld | -logsdir} log-directory

    In this directory, PRUN creates a log file for each script file by appending the .log extension to the name of the script file. If you do not specify a log file directory, PRUN places the log files in the same directory as the script files.

  • {-o | -overwrite} {y | n}

    If you specify y, PRUN overwrites the contents of existing log files. By default, PRUN keeps the original information in the log files and appends new information at the end of each file.

  • {-c | -connections} num

    Enter a number for the maximum number of connections If you do not specify the maximum number of connections, PRUN uses two connections.

8.21.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If you execute the PRUN command without any arguments, then TrafCI prompts you for the PRUN arguments. If you specify one or more options, then the PRUN command runs without prompting you for more input. In the non-interactive mode, if any options are not specified, PRUN uses the default values.

  • The -d or -defaults option cannot be specified with any other option.

  • The PRUN log files also contain the log end time.

  • PRUN does not support the SPOOL or LOG commands. Those commands are ignored in PRUN script files.

  • The environment values from the main session (which are available through the SET commands) are propagated to new sessions started via PRUN. However, prepared statements and parameters are bound only to the main user session.

  • For a summary of all errors and warnings that occurred during the PRUN operation, go to the error subdirectory in the same directory as the log files (for example, C:\log\error) and open the prun.err.log summary file.

  • For details about the errors that occurred during the execution of a script file, open each individual log file (script-file.sql.log).

8.21.3. Examples

  • To use PRUN, enter the PRUN command in the TrafCI session:

    SQL> PRUN
    Enter  as input to stop the current prun session
    --------------------------------------------------
    Enter the scripts directory              : c:\ddl_scripts
    Enter the script file extension[sql]     :
    Enter the logs directory[scripts dir]    : c:\log
    Overwrite the log files (y/n)[n]?        : y
    Enter the number of connections(2-248)[2]: 3

    After you enter the number of connections, PRUN starts to process the script files and displays this status:

    Status: In Progress.......

    After executing all the script files, PRUN returns a summary of the operation:

             __________________________________________________
                      PARALLELRUN(PRUN) SUMMARY
             __________________________________________________
             Total files present............................. 3
             Total files processed........................... 3
             Total queries processed........................ 40
             Total errors.................................... 4
             Total warnings.................................. 0
             Total successes................................ 36
             Total connections............................... 3
             Total connection failures....................... 0
    
             Please verify the error log file c:\log\error\prun.err.log
    SQL>
    In the PRUN summary, the Total queries processed is the total number of commands that PRUN processes. Those commands can include SQL statements and commands. The total errors, warnings, and successes also include commands other than SQL statements.
  • This PRUN command initiates a parallel run operation with the -d option:

    SQL> PRUN -d
    SQL> PRUN -scriptsdir ./prun/sql -e sql -ld ./prun/logs -o y -connections 5
    
    PRUN options are -scriptsdir    c:/_trafci/prun
                     -logsdir       c:/_trafci/prun/logs
                     -extension     sql
                     -overwrite     y
                     -connections   5
    Status: Complete
    
             __________________________________________________
                      PARALLELRUN(PRUN) SUMMARY
             __________________________________________________
             Total files present............................ 99
             Total files processed.......................... 99
             Total queries processed....................... 198
             Total errors.................................... 0
             Total warnings.................................. 0
             Total warnings.................................. 0
             Total connections............................... 5
             Total connection failures....................... 0
    
    ===========================================================================
    PRUN completed at May 20, 2105 9:33:21 AM
    ===========================================================================
  • PRUN can be started in non-interactive mode using the -q parameter of trafci.cmd or trafci.sh, thus requiring no input:

    trafci.cmd -h 16.123.456.78
    -u user1 -p host1
    -q "PRUN -sd c:/_trafci/prun -o y -c 3"
  • PRUN can be started in non-interactive mode from an OBEY file:

    SQL> OBEY startPrun.txt
    SQL> PRUN -sd c:/_trafci/prun -ld c:/_trafci/prun/logs -e sql -o y -c 5
    
    PRUN options are -scriptsdir    c:/_trafci/prun
                     -logsdir       c:/_trafci/prun/logs
                     -extension     sql
                     -overwrite     yes
                     -connections   5
    Status: Complete

8.22. QUIT Command

The QUIT command disconnects from and exits TrafCI.

8.22.1. Syntax

QUIT [WITH] [status] [IF {condition}]
  • status

    is any 1-byte integer. status is a shell return value, and the range of allowable values is platform dependent.

  • condition

    is the same as the condition parameter defined for the IF…THEN Command. See Condition Parameters.

8.22.2. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.22.3. Examples

  • This command disconnects from and exits TrafCI, which disappears from the screen:

    SQL> QUIT
  • In a script file, the conditional exit command causes the script file to quit running and disconnect from and exit TrafCI when the previously run command returns error code 4082:

    SQL> LOG c:\errorCode.log
    SQL> SELECT * FROM employee;
    SQL> QUIT IF errorcode=4082
    SQL> LOG OFF

    These results are logged when error code 4082 occurs:

    SQL> SELECT * FROM employee;
    
    **** ERROR[4082] Table, view or stored procedure TRAFODION.USR.EMPLOYEE does not exist or is inaccessible.
    
    SQL> QUIT IF errorcode=4082

8.23. RECONNECT Command

The RECONNECT command creates a new connection to the Trafodion database using the login credentials of the last successful connection.

8.23.1. Syntax

RECONNECT

8.23.2. Considerations

The host name (or IP address) and port number, plus the credentials (user name and password), are used from information previously entered. This is the information specified at launch or when the last CONNECT command was executed.

If TrafCI was invoked with the -noconnect launch parameter, TrafCI prompts you for the values.

8.23.3. Examples

  • This command creates a new connection to the Trafodion database using the login credentials of the last successful connection:

    SQL> RECONNECT
    
    Connected to Trafodion

8.24. REPEAT Command

The REPEAT command re-executes a previous command.

8.24.1. Syntax

REPEAT [text | [-]number ]
  • text

    specifies the text of the most recently executed command. The command must have been executed beginning with text, but text need be only as many characters as necessary to identify the command. TrafCI ignores leading blanks.

  • number

    is an integer that identifies a command in the history buffer. If number is negative, it indicates the position of the command in the history buffer relative to the current command; if number is positive, it is the ordinal number of a command in the history buffer.

The HISTORY command displays the commands or statements in the history buffer. See the HISTORY Command.

8.25. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • To re-execute the immediately preceding command, enter REPEAT without specifying a number. If you enter more than one command on a line, then the REPEAT command re-executes only the last command on the line.

  • When a command is selected for repeat, and the SQL terminator value has changed since the execution of that command, then TrafCI replaces the SQL terminator in the command with the current SQL terminator value and executes the command.

8.25.1. Examples

  • Display the previously executed commands and re-execute the second to the last command:

    SQL> HISTORY
    
    1> SET IDLETIMEOUT 0
    2> LOG ON
    3> SET SCHEMA persnl;
    4> SELECT * FROM employee;
    5> SHOW TABLES
    6> SELECT * FROM dept;
    7> SHOW VIEWS
    8> SELECT *  FROM emplist;
    
    SQL>
    SQL> REPEAT -2
    
    SHOW VIEWS
    VIEW NAMES
    -------------------------------------------------------------
    EMPLIST  MGRLIST
    
    SQL>
  • Re-execute the fifth command in the history buffer:

    SQL> REPEAT 5
    
    SHOW TABLES
    TABLE NAMES
    -------------------------------------------------------------
    DEPT     EMPLOYEE   JOB         PROJECT
    
    SQL>
  • Re-execute the SHOW TABLES command:

    SQL> REPEAT SHOW
    
    SHOW TABLES
    TABLE NAMES
    -------------------------------------------------------------
    DEPT     EMPLOYEE   JOB         PROJECT
    
    SQL>

8.26. RESET LASTERROR Command

The RESET LASTERROR command resets the last error code to 0.

8.26.1. Syntax

RESET LASTERROR

8.26.2. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.26.3. Examples

  • This command resets the last error in the current session:

    SQL> SELECT * FROM emp;
    
    **** ERROR[4082]Object TRAFODION.SCH.EMP does not exist or is inaccessible.
    
    SQL> SHOW LASTERROR
    
    LASTERROR 4082
    
    SQL> RESET LASTERROR
    SQL> SHOW LASTERROR
    
    LASTERROR 0

8.27. RESET PARAM Command

The RESET PARAM command clears all parameter values or a specified parameter value in the current session.

8.27.1. Syntax

RESET PARAM [param-name]
  • param-name

    is the name of the parameter for which you specified a value. Parameter names are case-sensitive. For example, the parameter ?pn is not equivalent to the parameter ?PN. param-name can be preceded by a question mark (?), such as ?param-name.

    If you do not specify a parameter name, all of the parameter values in the current session are cleared.

8.27.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • To clear several parameter values but not all, you must use a separate RESET PARAM command for each parameter.

8.27.3. Example

  • This command clears the setting of the ?sal (salary) parameter, and the SET PARAM command resets it to a new value:

    SQL> RESET PARAM ?sal +
    SQL> SET PARAM ?sal 80000.00

For more information, see Reset the Parameters.

8.28. RUN Command

The RUN command executes the previously executed SQL statement. This command does not repeat an interface command.

8.28.1. Syntax

RUN

8.28.2. Considerations

  • You must enter the command on one line.

  • The command does not require an SQL terminator.

8.28.3. Example

  • This command executes the previously executed SELECT statement:

    SQL> SELECT COUNT(*) FROM persnl.employee;
    
    (EXPR)
    --------------------
    62
    
    --- 1 row(s) selected.
    
    SQL> RUN
    
    (EXPR)
    --------------------
    62
    
    --- 1 row(s) selected.
    
    SQL>

8.29. SAVEHIST Command

The SAVEHIST command saves the session history in a user-specified file. The session history consists of a list of the commands that were executed in the TrafCI session before the SAVEHIST command.

8.29.1. Syntax

SAVEHIST file-name [CLEAR]
  • file-name

    is the name of a file into which TrafCI stores the session history. If you want the history file to exist outside the local directory where you launch TrafCI (by default, the bin directory), specify the full directory path of the history file. The specified directory must exist before you execute the SAVEHIST command.

  • CLEAR

    instructs TrafCI to clear the contents of the specified file before adding the session history to the file.

8.29.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the specified file already exists, TrafCI appends newer session-history information to the file.

8.29.3. Examples

  • This command clears the contents of an existing file named history.txt in the local directory (the same directory where you are running TrafCI) and saves the session history in the file:

    SQL> SAVEHIST history.txt CLEAR
    SQL>
  • This command saves the session history in a file named hist.txt in the specified directory on a Windows workstation:

    SQL> SAVEHIST c:\log_files\hist.txt
    SQL>
  • This command saves the session history in a file named hist.txt in the specified directory on a Linux or UNIX workstation:

    SQL> SAVEHIST ./log_files/hist.txt
    SQL>

For more information, see Display Executed Commands.

8.30. SET COLSEP Command

The SET COLSEP command sets the column separator and allows you to control the formatting of the result displayed for SQL queries. The SET COLSEP command specifies a delimiter value to use for separating columns in each row of the results. The default delimiter is " "(white space).

8.30.1. Syntax

SET COLSEP [separator]

8.30.2. Considerations

  • You must enter the command on one line.

  • The SET COLSEP command has no effect if the markup is set to HTML,XML, or CSV.

8.30.3. Examples

  • This command specifies the separator as a “|”(pipe):

    SQL> SET COLSEP |
    SQL> SHOW COLSEP
    COLSEP "|"
    SQL> SELECT * FROM employee;
    
    EMPNUM|EMPNAME       |REGNUM|BRANCHNUM|JOB
    ------|--------------|------|---------|--------
    |    1|ROGER GREEN   |    99|        1|MANAGER
    |   23|JERRY HOWARD  |     2|        1|MANAGER
    |   29|JACK RAYMOND  |     1|        1|MANAGER
    |   32|THOMAS RUDLOFF|     5|        3|MANAGER
    |   39|KLAUS SAFFERT |     5|        2|MANAGER
    
    --- 5 row(s) selected.

8.31. SET FETCHSIZE Command

The SET FETCHSIZE command allows you to change the default fetchsize used by JDBC. Setting the value to 0 sets the fetchsize to the default value used in JDBC.

8.31.1. Syntax

SET FETCHSIZE _value_
  • value

    is an integer representing the fetch size as a number of rows. Zero (0) represents the default value of fetch size set in JDBC.

8.31.2. Considerations

  • You must enter the command on one line.

  • The command does not require an SQL terminator.

8.31.3. Examples

  • This command sets the fetchsize to 1:

    SQL> SET FETCHSIZE 1
    SQL> SHOW FETCHSIZE
    
    FETCHSIZE 1
    
    SQL> SELECT * FROM stream(t1);
    
    C1      C2      C3
    ------- ------- -------
    TEST1   TEST2   TEST3
    AAA     BBB     CCC

8.32. SET HISTOPT Command

The SET HISTOPT command sets the history option and controls how commands are added to the history buffer. By default, commands within a script file are not added to history. If the history option is set to ALL, then all the commands in the script file are added to the history buffer. If no options are specified, DEFAULT is used.

8.32.1. Syntax

SET HISTOPT [ ALL | DEFAULT ]

8.32.2. Considerations

You must enter the command on one line.

8.32.3. Examples

  • This command shows only the obey commands added to the history buffer.

    SQL> SHOW HISTOPT
    
    HISTOPT DEFAULT [No expansion of script files]
    
    SQL> OBEY e:\scripts\nobey\insert2.sql
    
    SQL> ?SECTION insert
    
    SQL> SET SCHEMA trafodion.sch;
    
    --- SQL operation complete.
    
    SQL>  INSERT INTO course1 VALUES
    +> ('C11', 'Intro to CS','For Rookies',3, 100,'CIS');
    
    --- 1 row(s) inserted.
    
    SQL>  INSERT INTO course1 VALUES
    +> ('C55', 'Computer Arch.','VON Neumann''S Mach.',3, 100, 'CIS');
    
    --- 1 row(s) inserted.
SQL> HISTORY;

1> SHOW HISTOPT
2> OBEY e:\scripts\nobey\insert2.sql
  • This command shows all the commands added to the history buffer.

    SQL> SET HISTOPT ALL
    SQL> OBEY e:\scripts\nobey\insert2.sql
    
    ?SECTION insert
    
    SQL>  set schema trafodion.sch;
    
    --- SQL operation complete.
    
    SQL>  INSERT INTO course1 VALUES
    +> ('C11','Intro to CS','For Rookies',3, 100, 'CIS');
    
    ---1 row(s) inserted.
    
    SQL>  INSERT INTO course1 VALUES
    +> ('C55','Computer Arch.','Von Neumann''s Mach.',3,100, 'CIS');
    
    ---1 row(s) inserted.
    
    SQL> HISTORY;
    
    1> SHOW HISTOPT
    2> OBEY e:\scripts\nobey\insert2.sql
    3> HISTORY;
    4> SET HISTOPT ALL
    5> SET SCHEMA trafodion.sch;
    6> INSERT INTO course1 VALUES
         ('C11','Intro to CS','For Rookies',3, 100, 'CIS');
    7> INSERT INTO course1 VALUES
         ('C55','Computer Arch.','Von Neumann''s MACH.',3,100, 'CIS');

8.33. SET IDLETIMEOUT Command

The SET IDLETIMEOUT command sets the idle timeout value for the current session. The idle timeout value of a session determines when the session expires after a period of inactivity. The default is 30 minutes.

8.33.1. Syntax

SET IDLETIMEOUT value
  • value

    is an integer representing the idle timeout value in minutes. Zero represents an infinite amount of time, meaning that the session never expires.

8.33.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If you execute this command in a script file, it affects the session in which the script file runs. You can specify this command in PRUN script files. However, running this command from a PRUN script file does not affect the idle timeout value for the current session.

  • To reset the default timeout value, enter this command:

    SET IDLETIMEOUT 30

8.33.3. Examples

  • This command sets the idle timeout value to four hours:

    SQL> SET IDLETIMEOUT 240
  • This command sets the idle timeout value to an infinite amount of time so that the session never expires:

    SQL> SET IDLETIMEOUT 0
  • To reset the idle timeout to the default, enter this command:

    SQL> SET IDLETIMEOUT 30
    SQL>

For more information, see Set and Show Session Idle Timeout Value.

8.34. SET LIST_COUNT Command

The SET LIST_COUNT command sets the maximum number of rows to be returned by SELECT statements that are executed after this command. The default is zero, which means that all rows are returned.

8.34.1. Syntax

SET LIST_COUNT num-rows
  • num-rows

    is a positive integer that specifies the maximum number of rows of data to be displayed by SELECT statements that are executed after this command. Zero means that all rows of data are returned.

8.34.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • To reset the number of displayed rows, enter this command:

    SET LIST_COUNT 0

8.34.3. Examples

  • This command specifies that the number of rows to be displayed by SELECT statements is five:

    SQL> SET LIST_count 5
    SQL> SELECT empnum, first_name, last_name FROM persnl.employee ORDER BY empnum;
    
    EMPNUM FIRST_NAME      LAST_NAME
    ------ --------------- --------------------
         1 ROGER           GREEN
        23 JERRY           HOWARD
        29 JANE            RAYMOND
        32 THOMAS          RUDLOFF
        39 KLAUS           SAFFERT
    
    --- 5 row(s) selected. LIST_COUNT was reached.
    
    SQL>
  • This command resets the number of displayed rows to all rows:

    SQL> SET LIST_COUNT 0
    SQL> SELECT empnum, first_name, last_name
    +> FROM persnl.employee
    +> ORDER BY empnum;
    
    EMPNUM FIRST_NAME      LAST_NAME
    ------ --------------- --------------------
         1 ROGER           GREEN
        23 JERRY           HOWARD
        29 JANE            RAYMOND
        32 THOMAS          RUDLOFF
        39 KLAUS           SAFFERT
        43 PAUL            WINTER
        65 RACHEL          MCKAY
    ...
       995 Walt            Farley
    
    --- 62 row(s) selected.
    
    SQL>

8.35. SET MARKUP Command

The SET MARKUP command sets the markup format and controls how results are displayed by TrafCI.

8.35.1. Syntax

SET MARKUP [ RAW | HTML | XML | CSV | COLSEP ]

The supported options enable results to be displayed in XML, HTML, CSV (Comma Separated Values), and COLSEP format. The default format is RAW.

8.35.2. Considerations

  • You must enter the command on one line.

  • If the MARKUP format is CSV or COLSEP, the column header information and status messages are not displayed.

  • For the XML and HTML markup format, the syntax and interface errors is consistent XML and HTML markup is displayed.

  • For XML markup, any occurrence of ]]> that appear in the error message or invalid query are replaced with ]]>.

  • When error messages are output as HTML markup, both the > (greater than) and < (less than) symbols are replaced with their escaped versions: > and <, respectively. An example of the formatted error messages are show below.

8.35.3. Examples

  • This command specifies results be displayed in HTML:

    SQL> SET MARKUP HTML
    SQL> SELECT c.custnum, c.custnum, ordernum, order_date
    +> FROM customer c, orders o where c.custnum=o.custnum;
    
    <TABLE>
    <!--SELECT c.custnum, c.custname,ordernum,order_date
    FROM customer c, orders o where c.custnum=o.custnum;-->
    <tr>
      <th>CUSTNUM</th>
      <th>CUSTNAME</th>
      <th>ORDERNUM</th>
      <th>ORDER_DATE</th>
    </tr>
    <tr>
      <td>143</td>
      <td>STEVENS SUPPLY</td>
      <td>700510</td>
      <td>2105-05-01</td>
    </tr>
    <tr>
      <td>3333</td>
      <td>NATIONAL UTILITIES</td>
      <td>600480</td>
      <td>2105-05-12</td>
    </tr>
    <tr>
      <td>7777</td>
      <td>SLEEP WELL HOTELS</td>
      <td>100250</td>
      <td>2105-01-23</td>
    </tr>
    <!-- --- 3 row(s) selected.-->
    </TABLE>
SQL> SELECT c.custnum, c.custname,ordernum,order_date,
+> FROM customer c, orders o where c.custnum=o.custnum;

<TABLE>
<!-- SELECT c.custnum, c.custname,ordernum,order_date,
FROM customer c, orders o where c.custnum=o.custnum;-->
<tr>
  <th>Error Id</th>
  <th>Error Code</th>
  <th>Error Message</th>
</tr>
<tr>
  <td>1</td>
  <td>4082</td>
  <td>Object TRAFODION.NVS.CUSTOMER does not exist or is inaccessible.</td>
</tr>
</TABLE>
  • To set the application to format output as HTML:

    SQL> SET MARKUP HTML

    HTML formatted error message example:

    SQL> SET MARKUP <invalid>
    
    <?xml version="1.0"?>
    <Results>
      <Query>
        <![CDATA[set markup <invalid ]]>
      </Query>
      <ErrorList>
        <Error id="1">
        <ErrorCode>NVCI001</ErrorCode>
        <ErrorMsg> <![CDATA[
    ERROR: A syntax error occurred at or before:
    set markup <invalid>
               ^ ]]
        </ErrorMsg>
      </ErrorList>
    </Results>
  • This command specifies results be displayed in CSV:

    SQL> SET MARKUP CSV
    SQL> SELECT c.custnum, c.custnum, ordernum, order_date
    +> FROM customer c,orders o where c.custnum=o.custnum;
    
    143,STEVENS SUPPLY ,700510,2105-05-01
    3333,NATIONAL UTILITIES,600480,2105-05-12
    7777,SLEEPWELL HOTELS ,100250,2105-01-23
    324,PREMIER INSURANCE ,500450,2105-04-20
    926,METALL-AG. ,200300,2105-02-06
    123,BROWN MEDICAL CO ,200490,2105-03-19
    123,BROWN MEDICAL CO ,300380,2105-03-19
    543,FRESNO STATE BANK ,300350,2105-03-03
    5635,ROYAL CHEMICALS ,101220,2105-05-21
    21,CENTRAL UNIVERSITY,200320,2105-02-17
    1234,DATASPEED ,100210,2105-04-10
    3210,BESTFOOD MARKETS ,800660,2105-05-09
  • This command specifies results be displayed in XML:

    SQL> SET MARKUP XML
    SQL> SELECT * FROM author
    
    <?xml version="1.0"?>
    <Results>
      <Query>
        <![CDATA[select  from author;]]>
      </Query>
      <rowid="1">
        <AUTHORID>91111</AUTHORID>
        <AUTHORNAME>Bjarne Stroustrup</AUTHORNAME>
      </row>
      <rowid="2">
        <AUTHORID>444444</AUTHORID>
        <AUTHORNAME>John Steinbeck</AUTHORNAME>
      </row>
      <rowid="3">
        <AUTHORID>2323423</AUTHORID>
        <AUTHORNAME>Irwin Shaw</AUTHORNAME>
      </row>
      <rowid="4">
        <AUTHORID>93333</AUTHORID>
        <AUTHORNAME>Martin Fowler</AUTHORNAME>
      </row>
      <rowid="5">
        <AUTHORID>92222</AUTHORID>
        <AUTHORNAME>Grady Booch</AUTHORNAME>
      </row>
      <rowid="6">
        <AUTHORID>84758345</AUTHORID>
        <AUTHORNAME>Judy Blume</AUTHORNAME>
      </row>
      <rowid="7">
        <AUTHORID>89832473</AUTHORID>
        <AUTHORNAME>Barbara Kingsolver</AUTHORNAME>
      </row>
      <Status> <![CDATA[-- 7 row(s) selected .]]></Status>
    </Results>
  • To set the application to format output as XML:

    SQL> SET MARKUP XML

    XML formatted error message examples:

    SQL> SET MARKUP <]]>
    
    <?xml version="1.0"?>
    <Results>
      <Query>
        <![CDATA[set markup <]]&#62; ]]>>
      </Query>
      <ErrorList>
        <Error id="1">
        <ErrorCode>UNKNOWN ERROR CODE</ErrorCode
        <ErrorMessage> <![CDATA[
    ERROR: A syntax error occurred at or before:
    set markup <]]&#62;>
               ^ ]]<>
        </ErrorMessage>
      </ErrorList>
    </Results>
  • This command displays CSV like output using the COLSEP value as a separator.

    SQL> SET COLSEP |
    SQL> SET MARKUP COLSEP
    SQL> SELECT * FROM employee;
    
    32|THOMAS       |RUDLOFF      |2000|100|138000.40
    39|KLAUS        |SAFFERT      |3200|100|75000.00
    89|PETER        |SMITH        |3300|300|37000.40
    29|JANE         |RAYMOND      |3000|100|136000.00
    65|RACHEL       |MCKAY        |4000|100|118000.00
    75|TIM          |WALKER       |3000|300|320000.00
    11|ROGER        |GREEN        |9000|100|175500.00
    93|DONALD       |TAYLOR       |3100|300|33000.00

8.36. SET PARAM Command

The SET PARAM command associates a parameter name with a parameter value in the current session. The parameter name and value are associated with one of these parameter types:

  • Named parameter (represented by ?param-name) in a DML statement or in a prepared SQL statement

  • Unnamed parameter (represented by ?) in a prepared SQL statement only

A prepared statement is one that you SQL compile by using the PREPARE statement. For more information about PREPARE, see the Trafodion SQL Reference Manual.

After running SET PARAM commands in the session:

  • You can specify named parameters (?param-name) in a DML statement.

  • You can execute a prepared statement with named parameters by using the EXECUTE statement without a USING clause.

  • You can execute a prepared statement with unnamed parameters by using the EXECUTE statement with a USING clause that contains literal values and/or a list of the named parameters set by SET PARAM.

The EXECUTE statement substitutes parameter values for the parameters in the prepared statement. For more information about EXECUTE, see the Trafodion SQL Reference Manual.

8.36.1. Syntax

SET PARAM param-name [UTF8] param-value
  • param-name

    is the name of the parameter for which a value is specified. Parameter names are case-sensitive. For example, the parameter ?pn is not equivalent to the parameter ?PN. param-name can be preceded by a question mark (?), such as ?param-name.

  • UTF8

    specifies that a character string specified for the parameter value, param-value, uses the UTF8 character set. If the character string is in UTF8 format, it must be prefixed by UTF8.

  • param-value

    is a numeric or character literal that specifies the value for the parameter. If you do not specify a value, TrafCI returns an error.

    If param-value is a character literal and the target column type is a character string, you do not have to enclose the value in single quotation marks. Its data type is determined from the data type of the column to which the literal is assigned. Character strings specified as parameter values are always case-sensitive even if they are not enclosed in quotation marks. If the character string is in UTF8 format, it must be prefixed by UTF8.

8.36.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • Use separate SET PARAM commands to name and assign values to each unique parameter in a prepared SQL statement before running the EXECUTE statement.

  • Parameter names are case-sensitive. If you specify a parameter name in lowercase in the SET PARAM command, you must specify it in lowercase in other statements, such as DML statements or EXECUTE.

  • The name of a named parameter (?param-name) in a DML statement must be identical to the parameter name (param-name) that you specify in a SET PARAM command.

8.36.3. Examples

  • This command sets a value for the ?sal (salary) parameter:

    SQL> SET PARAM ?sal 40000.00
  • This command sets a character string value, GREEN, for the ?lastname parameter:

    SQL> SET PARAM ?lastname GREEN
  • These commands set values for named parameters in a subsequent SELECT statement:

    SQL> SET PARAM ?sal 80000.00
    SQL> SET PARAM ?job 100
    SQL> SELECT * FROM persnl.employee WHERE salary = ?sal AND jobcode = ?job;
    
    EMPNUM FIRST_NAME      LAST_NAME            DEPTNUM JOBCODE SALARY
    ------ --------------- -------------------- ------- ------- ----------
        72 GLENN           THOMAS                  3300     100   80000.00
    
    --- 1 row(s) selected.
    
    SQL>
    The names of the named parameters, ?sal and ?job, in the SELECT statement are identical to the parameter names, sal and job, in the SET PARAM command.
  • This command sets a character string value, Peña, which is in UTF8 format, for the ?lastname parameter:

    SQL> SET PARAM ?lastname UTF8'Pe&#241;a'
  • This command sets a character string value, which uses the UTF8 character set and is in hexadecimal notation, for the ?lastname parameter:

    SQL> SET PARAM ?lastname UTF8x'5065266e74696c64653b61'

For more information, see Set Parameters.

8.37. SET PROMPT Command

The SET PROMPT command sets the prompt of the current session to a specified string and/or to the session variables, which start with %. The default prompt is SQL>.

8.37.1. Syntax

SET PROMPT [string] [%USER] [%SERVER] [%SCHEMA]
  • string

    is a string value to be displayed as the prompt. The string may contain any characters. Spaces are allowed if you enclose the string in double quotes ("). If you do not enclose the string in double quotes, the prompt is displayed in uppercase.

  • %USER

    displays the session user name as the prompt.

  • %SERVER

    displays the session host name and port number as the prompt.

  • %SCHEMA

    displays the session schema as the prompt.

8.37.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • To reset the default prompt, enter this command:

    SET PROMPT

8.37.3. Examples

  • This SET PROMPT command sets the SQL prompt to ENTER>:

    SQL> SET PROMPT Enter>
    ENTER>
  • To reset the SQL prompt to the default, enter this SET PROMPT command:

    ENTER> SET PROMPT +
    SQL>
  • This command displays the session user name for the prompt:

    SQL> SET PROMPT %user>
    user1>
  • This command displays the session host name and port number for the prompt:

    SQL> SET PROMPT %server>
    sqws135.houston.host.com:22900>
  • This command displays the session schema for the prompt:

    SQL> SET PROMPT "Schema %schema:"
    Schema USR:
  • This command displays multiple session variables:

    SQL> SET PROMPT %USER@%SCHEMA> user1@USR>
    user1@USR>set prompt %SERVER:%USER>
    sqws135.houston.host.com:22900:user1>
    sqws135.houston.host.com:22900:user1> SET PROMPT "%schema CI> "
    USR CI>

For more information, see Customize Standard Prompt.

8.38. SET SQLPROMPT Command

The SET SQLPROMPT command sets the SQL prompt of the current session to a specified string. The default is SQL>.

8.38.1. Syntax

SET SQLPROMPT [string] [%USER] [%SERVER] [%SCHEMA]
  • string

    is a string value to be displayed as the SQL prompt. The string may contain any characters. Spaces are allowed if you enclose the string in double quotes. If you do not enclose the string in double quotes ("), the prompt is displayed in uppercase.

  • %USER

    displays the session user name as the prompt.

  • %SERVER

    displays the session host name and port number as the prompt.

  • %SCHEMA

    displays the session schema as the prompt.

8.38.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • To reset the default SQL prompt, enter this command:

    SET SQLPROMPT

8.38.3. Examples

  • This command sets the SQL prompt to ENTER>:

    SQL> SET SQLPROMPT Enter>
    ENTER>
  • To reset the SQL prompt to the default, enter this command:

    ENTER> SET SQLPROMPT
    SQL>
  • This command displays the session user name for the prompt:

    SQL> SET SQLPROMPT %user>
    user1>
  • This command displays the session host name and port number for the prompt:

    SQL> SET SQLPROMPT %server>
    sqws135.houston.host.com:22900>
  • This command displays the session schema for the prompt:

    SQL> SET SQLPROMPT "Schema %schema:"
    Schema USR:
  • This command displays multiple session variables:

    SQL> SET SQLPROMPT %USER@%SCHEMA>
    user1@USR>
    
    SQL> SET SQLPROMPT %SERVER:%USER>
    sqws135.houston.host.com:22900:user1>
    sqws135.houston.host.com:22900:user1> SET SQLPROMPT "%schema CI> "
    USR CI>

For more information, see Customize Standard Prompt.

8.39. SET SQLTERMINATOR Command

The SET SQLTERMINATOR command sets the SQL statement terminator of the current session. The default is a semicolon (;).

8.39.1. Syntax

SET SQLTERMINATOR string
  • string

    is a string value for the SQL terminator. The string may contain any characters except spaces. Spaces are disallowed even if you enclose the string in double quotes. Lowercase and uppercase characters are accepted, but the SQL terminator is always shown in uppercase.

8.39.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • Do not include a reserved word as an SQL terminator.

  • If you execute this command in a script file, it affects not only the SQL statements in the script file but all subsequent SQL statements that are run in the current session. If you set the SQL terminator in a script file, reset the default terminator at the end of the script file.

  • To reset the default SQL terminator (;), enter this command:

    SET SQLTERMINATOR ;

8.39.3. Examples

  • This command sets the SQL terminator to a period (.):

    SQL> SET SQLTERMINATOR .
  • This command sets the SQL terminator to a word, go:

    SQL> SET SQLTERMINATOR go

    This query ends with the new terminator, go:

    SQL> SELECT * FROM persnl.employee go
  • To reset the SQL terminator to the default, enter this command:

    SQL> SET SQLTERMINATOR ;

For more information, Set and Show the SQL Terminator.

8.40. SET STATISTICS Command

The SET STATISTICS command automatically retrieves the statistics information for a query being executed. The results returned are the same as would have been returned if the GET STATISTICS command was executed. The default is OFF which means the statistics information is not automatically printed for any queries.

8.40.1. Syntax

SET STATISTICS { ON | OFF }

8.40.2. Considerations

You must enter the command on one line.

8.40.3. Examples

  • This command shows the default output format as PERTABLE:

    SQL> SET STATISTICS ON
    SQL> SELECT * FROM job;
    
    JOBCODE JOBDESC
    ------- ------------------
    100     MANAGER
    450     PROGRAMMER
    900     SECRETARY
    300     SALESREP
    500     ACCOUNTANT
    400     SYSTEM ANALYST
    250     ASSEMBLER
    420     ENGINEER
    600     ADMINISTRATOR
    200     PRODUCTION SUPV
    
    --- 11 row(s) selected.
    
    Start Time             2105/05/18 21:45:34.082329
    End Time               2105/05/18 21:45:34.300265
    Elapsed Time                      00:00:00.217936
    Compile Time                      00:00:00.002423
    Execution Time                    00:00:00.218750
    
    Table Name   Records  Records  Disk  Message  Message  Lock  Lock  Disk Process
                Accessed     Used  I/Os    Count    Bytes  Escl  Wait     Busy Time
    TRAFODION.TOI.JOB
                       2       2      0       4     15232     0     0           363
    
    
    SQL>

For more information on the STATISTICS command, see the Trafodion SQL Reference Manual.

8.41. SET TIME Command

The SET TIME command causes the local time of the client workstation to be displayed as part of the interface prompt. By default, the local time is not displayed in the interface prompt.

8.41.1. Syntax

SET TIME { ON[12H] | OFF }
  • ON

    specifies that the local time be displayed as part of the prompt.

  • OFF

    specifies that the local time not be displayed as part of the prompt. OFF is the default.

8.41.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • The default is a 24-hour military style display. The additional argument of 12h allows the time to be displayed in a 12-hour AM/PM style.

8.41.3. Examples

  • This command causes the local time to be displayed in the SQL prompt:

    SQL> SET TIME ON
    14:17:17 SQL>
  • This command causes the local time to be displayed in 12-hour AM/PM style in the SQL prompt:

    SQL> SET TIME ON 12H
    2:17:17 PM SQL>
  • This command turns off the local time in the SQL prompt:

    2:17:17 PM SQL> SET TIME OFF
    SQL>

For more information, see Customize the Standard Prompt.

8.42. SET TIMING Command

The SET TIMING command causes the elapsed time to be displayed after each SQL statement executes. This command does not cause the elapsed time of interface commands to be displayed. By default, the elapsed time is off.

8.42.1. Syntax

SET TIMING { ON | OFF }
  • ON

    specifies the elapsed time be displayed after each SQL statement executes.

  • OFF

    specifies that the elapsed time not be displayed after each SQL statement executes. OFF is the default.

8.42.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • The elapsed time value includes compile and execution time plus any network I/O time and client-side processing time.

8.42.3. Examples

  • This command displays the elapsed time of SQL statements:

    SQL> SET TIMING ON
  • This command turns off the elapsed time:

    SQL> SET TIMING OFF

For more information, see Display the Elapsed Time.

8.43. SHOW ACTIVITYCOUNT Command

The SHOW ACTIVITYCOUNT command provides an alias for SHOW RECCOUNT. ACTIVITYCOUNT is an alias for RECCOUNT. For more information, see the SHOW RECCOUNT Command.

8.43.1. Syntax

SHOW ACTIVITYCOUNT

8.43.2. Examples

  • This command shows the record count of the previous executed SQL statement:

    SQL> SHOW ACTIVITYCOUNT
    
    ACTIVITYCOUNT 0

8.44. SHOW ALIAS Command

The SHOW ALIAS command displays all or a set of aliases available in the current TrafCI session. If a pattern is specified, then all aliases matching the pattern are displayed. By default, all aliases in the current session are displayed.

8.44.1. Syntax

SHOW ALIAS [ alias-name | wild-card-pattern ]
  • alias-name

    is any alias name that is used with the ALIAS command. See ALIAS Command.

  • wild-card-pattern

    is a character string used to search for and display aliases with names that match the character string. wild-card-pattern matches an uppercase string unless you enclose it within double quotes. To look for similar values, specify only part of the characters of wild-card-pattern combined with these wild-card characters.

    %

    Use a percent sign (%) to indicate zero or more characters of any type.

    For example, %art% matches SMART, ARTIFICIAL, and PARTICULAR but not smart or Hearts. "%art%" matches smart and Hearts but not SMART, ARTIFICIAL, or PARTICULAR.

    *

    Use an asterisk () to indicate zero or more characters of any type.

    For example, *art
    matches SMART, ARTIFICIAL, and PARTICULAR but not smart or Hearts. "art" matches smart and Hearts but not SMART, ARTIFICIAL, or PARTICULAR.

    _

    Use an underscore (_) to indicate any single character.

    For example, boo_ matches BOOK and BOOT but not BOO or BOOTS. "boo_" matches book and boot but not boo or boots.

    ?

    Use a question mark (?) to indicate any single character.

    For example, boo? matches BOOK and BOOT but not BOO or BOOTS. "boo?" matches book and boot but not boo or boots.

8.44.2. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.44.3. Examples

  • This command displays a list of the available aliases:

    SQL> SHOW ALIAS
    
    .OS AS LH
    .GOTO AS GOTO
    USE AS SET SCHEMA
  • This command displays the .GOTO alias:

    SQL> SHOW ALIAS .GOTO
    
    .GOTO AS GOTO
  • This command displays the .FOO alias:

    SQL> SHOW ALIAS .FOO
    
    No aliases found.
  • This command displays all aliases beginning with the letter S:

    SQL> SHOW ALIAS S*
    
    SEL AS SELECT
    SHOWTIME AS SHOW TIME
    ST AS SHOW TABLES

8.45. SHOW ALIASES Command

The SHOW ALIASES command displays all the aliases available in the current TrafCI session.

8.45.1. Syntax

SHOW ALIASES

8.45.2. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.45.3. Examples

  • This command displays all the aliases in the current TrafCI session:

    SQL> SHOW ALIASES
    
    .OS AS LH
    .GOTO AS GOTO
    USE AS SET SCHEMA

8.46. SHOW CATALOG Command

The SHOW CATALOG command displays the current catalog of the TrafCI session.

8.46.1. Syntax

SHOW CATALOG

8.46.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.46.3. Example

  • This command shows that the current catalog of the session is TRAFODION:

    SQL> SHOW CATALOG
    
    CATALOG TRAFODION

8.47. SHOW COLSEP Command

The SHOW COLSEP command displays the value of the column separator for the current TrafCI session.

8.47.1. Syntax

SHOW COLSEP

8.47.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.47.3. Examples

  • This command displays the column separator.

    SQL> SHOW COLSEP
    
    COLSEP " "
    
    SQL> SET COLSEP
    SQL> SHOW COLSEP
    
    COLSEP ""
  • This command displays the column separator.

    SQL> SHOW COLSEP
    
    COLSEP " "
    
    SQL> SET COLSEP
    SQL> SHOW COLSEP
    
    COLSEP ""

8.48. SHOW ERRORCODE Command

The SHOW ERRORCODE command is an alias for the SHOW LASTERROR command. ERRORCODE is an alias for LASTERROR. For more information, see SHOW LASTERROR Command.

8.48.1. Syntax

SHOW ERRORCODE

8.48.2. Examples

  • This command displays the error of the last SQL statement that was executed:

    SQL> SHOW ERRORCODE
    
    ERRORCODE 29481

8.49. SHOW FETCHSIZE Command

The SHOW FETCHSIZE command displays the fetch size value for the current TrafCI session.

8.49.1. Syntax

SHOW FETCHSIZE

8.49.2. Considerations

You must enter the command on one line.

8.49.3. Examples

  • These commands display the fetch size in the current TrafCI session, set the fetch size to a new value, and then redisplay the fetch size:

    SQL> SHOW FETCHSIZE
    
    FETCHSIZE 0 [Default]
    
    SQL> SET FETCHSIZE 1
    SQL> SHOW FETCHSIZE
    
    FETCHSIZE 1

8.50. SHOW HISTOPT Command

The SHOW HISTOPT command displays the value that has been set for the history option.

8.50.1. Syntax

SHOW HISTOPT

8.50.2. Considerations

  • You must enter the command on one line.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.50.3. Examples

  • This command displays the value set for the history option:

    SQL> SHOW HISTOPT
    
    HISTOPT DEFAULT [No expansion of script files]
    
    SQL> SET HISTOPT ALL
    SQL> SHOW HISTOPT
    
    HISTOPT ALL

8.51. SHOW IDLETIMEOUT Command

The SHOW IDLETIMEOUT command displays the idle timeout value of the current TrafCI session. The idle timeout value of a session determines when the session expires after a period of inactivity. The default is 30 minutes.

8.51.1. Syntax

SHOW IDLETIMEOUT

8.51.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.51.3. Examples

  • This command shows that the idle timeout value of the session is 30 minutes, which is the default:

    SQL> SHOW IDLETIMEOUT
    
    IDLETIMEOUT 30 min(s)
    
    Elapsed time:00:00:00:078
  • This command shows that the idle timeout value of the session is four hours:

    SQL> SHOW IDLETIMEOUT
    
    IDLETIMEOUT 240 min(s)
  • This command shows that the idle timeout value is an infinite amount of time, meaning that the session never expires:

    SQL> SHOW IDLETIMEOUT
    
    IDLETIMEOUT 0 min(s) [Never Expires]
  • This command displays the elapsed time information because SET TIMING command is enabled:

    SQL> SET TIMING ON
    SQL> SHOW IDLETIMEOUT
    
    IDLETIMEOUT 0 min(s) [Never Expires]
    
    Elapsed time:00:00:00:078

For more information, see Set and Show Session Idle Timeout Value.

8.52. SHOW LASTERROR Command

The SHOW LASTERROR command displays the error of the last SQL statement that was executed. If the query was successful, then 0 is returned; otherwise an SQL error code is returned.

8.52.1. Syntax

SHOW LASTERROR

8.52.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.52.3. Examples

  • This command shows the last error in the current session:

    SQL> SELECT * FROM emp;
    
    **** ERROR[4082]Object TRAFODION.SCH.EMP does not exist or is inaccessible.
    
    SQL> SHOW LASTERROR
    
    LASTERROR 4082

8.53. SHOW LIST_COUNT Command

The SHOW LIST_COUNT command displays the maximum number of rows to be returned by SELECT statements in the current TrafCI session. The default is zero, which means that all rows are returned.

8.53.1. Syntax

SHOW LIST_COUNT

8.53.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.53.3. Examples

  • This command shows that SELECT statements return all rows in the current session:

    SQL> SHOW LIST_COUNT
    
    LISTCOUNT 0 [All Rows]
    
    Elapsed time:00:00:00:078
  • This command shows that the maximum number of rows to be displayed by SELECT statements in the session is five:

    SQL> SET LIST_COUNT 5
    SQL> SHOW LIST_COUNT
    
    LIST_COUNT 5
    
    Elapsed time:00:00:00:078

8.54. SHOW MARKUP Command

The SHOW MARKUP command displays the value set for the markup option.

8.54.1. Syntax

SHOW MARKUP

8.54.2. Considerations

  • You must enter the command on one line.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.54.3. Examples

  • This command displays the value set for the markup option:

    SQL> SHOW MARKUP
    
    MARKUP RAW
    
    Elapsed time:00:00:00:078

8.55. SHOW PARAM Command

The SHOW PARAM command displays the parameters that are set in the current TrafCI session.

8.55.1. Syntax

SHOW PARAM

8.55.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.55.3. Example

  • This command shows that parameters that are set for the current session:

    SQL> SHOW PARAM
    
    lastname GREEN
    dn 1500
    sal 40000.00
  • This command shows that when no parameters exist, the SHOW PARAM command displays an error message:

    SQL> SHOW PARAM
    
    No parameters found.

For more information, Display Session Parameters.

8.56. SHOW PREPARED Command

The SHOW PREPARED command displays the prepared statements in the current TrafCI session. If a pattern is specified, then all prepared statements matching the prepared statement name pattern are displayed. By default, all prepared statements in the current session are displayed.

8.56.1. Syntax

SHOW PREPARED

8.56.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.56.3. Examples

  • This command shows all the prepared statements, by default:

    SQL> SHOW PREPARED
    
    S1
           SELECT *  FROM t1
    S2
           SELECT * FROM student
    T1
           SELECT * FROM test123
    
    SQL> SHOW PREPARED s%
    
    S1
           SELECT * FROM t1
    S2
           SELECT * FROM student
    
    SQL> SHOW PREPARED t%
    
    T1
           SELECT * FROM test123

8.57. SHOW RECCOUNT Command

The SHOW RECCOUNT command displays the record count of the previously executed SQL statement. If the previously executed command was an interface command, then TrafCI returns zero.

8.57.1. Syntax

SHOW RECCOUNT

8.57.2. Considerations

  • You must enter the command on one line. The command does not need an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.57.3. Examples

  • This command displays the record count of the SQL statement that was executed last:

    SQL> SELECT * FROM employee;
    SQL> SHOW RECCOUNT
    
    RECCOUNT 62

8.58. SHOW REMOTEPROCESS Command

The SHOW REMOTEPROCESS command displays the process name of the DCS server that is handling the current connection.

8.58.1. Syntax

SHOW REMOTEPROCESS

8.58.2. Considerations

  • You must enter the command on one line. The command does not need an SQL terminator.

  • The command does not need an SQL terminator.

8.58.3. Example

  • This command displays the process name, \g4t3028.houston.host.com:0.$Z0000M2, of the DCS server that is handling the current connection:

    SQL> SHOW REMOTEPROCESS
    
    REMOTE PROCESS \g4t3028.houston.host.com:0.$Z0000M2
    
    SQL>

8.59. SHOW SCHEMA Command

The SHOW SCHEMA command displays the current schema of the TrafCI session.

8.59.1. Syntax

SHOW SCHEMA

8.59.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.59.3. Example

  • This command shows that the current schema of the session is PERSNL:

    SQL> SHOW SCHEMA
    
    SCHEMA PERSNL

For more information, see Set and Show the Current Schema.

8.60. SHOW SESSION Command

SHOW SESSION or SESSION displays attributes of the current TrafCI session. You can also use the ENV command to perform the same function.

8.60.1. Syntax

[SHOW] SESSION

8.60.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

  • SHOW SESSION or SESSION displays these attributes:

    Attribute Description

    COLSEP

    Current column separator, which is used to control how query results are displayed.

    For more information, SET COLSEP Command.

    HISTOPT

    Current history options, which controls how the commands are added to the history buffer.

    For more information, see SET HISTOPT Command.

    IDLETIMEOUT

    Current idle timeout value, which determines when the session expire after a period of inactivity. By default, the idle timeout is 30 minutes.

    For more information, see Set and Show Session Idle Timeout Value and SET IDLETIMEOUT Command.

    LIST_COUNT

    Current list count, which is the maximum number of rows that can be returned by SELECT statements. By default, the list count is all rows.

    For more information, see SET LIST_COUNT Command.

    LOG FILE

    Current log file and the directory containing the log file. By default, logging during a session is turned off.

    For more information, see Log Output, and LOG Command.

    LOG OPTIONS

    Current logging options. By default, logging during a session is turned off, and this attribute does not appear in the output.

    For more information, see the LOG Command or SPOOL Command.

    MARKUP

    Current markup option selected for the session. The default option is RAW.

    For more information, see SET MARKUP Command".

    PROMPT

    Current prompt for the session. For example, the default is SQL>.

    For more information, see Customize the Standard Prompt and SET PROMPT Command.

    SCHEMA

    Current schema. The default is USR.

    For more information, see Set and Show the Current Schema.

    SERVER

    Host name and port number that you entered when logging in to the database platform.

    For more information, see Log In to Database Platform.

    SQLTERMINATOR

    Current SQL statement terminator. The default is a semicolon (;).

    For more information, see Set and Show the SQL Terminator and SHOW SQLTERMINATOR Command.

    STATISTICS

    Current setting (on or off) of statistics.

    For more information, see the SET STATISTICS Command.

    TIME

    Current setting (on or off) of the local time as part of the prompt. When this command is set to on, military time is displayed. By default, the local time is off.

    For more information, see Customize the Standard Prompt and SET TIME Command.

    TIMING

    Current setting (on or off) of the elapsed time. By default, the elapsed time is off.

    For more information, see Display the Elapsed Time and SET TIMING Command.

    USER

    User name that you entered when logging in to the database platform.

    For more information, see Log In to Database Platform.

8.60.3. Examples

  • This SHOW SESSION command displays the attributes of the current session:

    SQL> SHOW SESSION
    
    COLSEP             " "
    HISTOPT            DEFAULT [No expansion of script files]
    IDLETIMEOUT        0 min(s) [Never Expires]
    LIST_COUNT         0 [All Rows]
    LOG FILE           c:\session.txt
    LOG OPTIONS        APPEND,CMDTEXT ON
    MARKUP             RAW
    PROMPT             SQL>
    SCHEMA             SEABASE
    SERVER             sqws135.houston.host.com:23400
    SQLTERMINATOR      ;
    STATISTICS         OFF
    TIME               OFF
    TIMING             OFF
    USER               user1
  • This SESSION command shows the effect of setting various session attributes:

    SQL> SESSION
    
    COLSEP             " "
    HISTOPT            DEFAULT [No expansion of script files]
    IDLETIMEOUT        30 min(s)
    LIST_COUNT         0 [All Rows]
    LOG                OFF
    MARKUP             RAW
    PROMPT             SQL>
    SCHEMA             SEABASE
    SERVER             sqws135.houston.host.com:23400
    SQLTERMINATOR      ;
    STATISTICS         OFF
    TIME               OFF
    TIMING             OFF
    USER               user1
    
    SQL>

8.61. SHOW SQLPROMPT Command

The SHOW SQLPROMPT command displays the value of the SQL prompt for the current TrafCI session.

8.61.1. Syntax

SHOW SQLPROMPT

8.61.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.61.3. Example

  • This command shows that the SQL prompt for the current session is SQL>:

    SQL> SHOW SQLPROMPT
    SQLPROMPT SQL>

8.62. SHOW SQLTERMINATOR Command

The SHOW SQLTERMINATOR command displays the SQL statement terminator of the current TrafCI session.

8.62.1. Syntax

SHOW SQLTERMINATOR

8.62.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.62.3. Example

  • This command shows that the SQL terminator for the current session is a period (.):

    SQL> SHOW SQLTERMINATOR
    
    SQLTERMINATOR .

For more information, see Set and Show the SQL Terminator.

8.63. SHOW STATISTICS Command

The SHOW STATISTICS command displays if statistics has been enabled or disabled for the current session.

8.63.1. Syntax

SHOW STATISTICS

8.63.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.63.3. Example

  • This command shows SHOW STATISTICS disabled and then enabled:

    SQL> SHOW STATISTICS
    
    STATISTICS OFF
    
    SQL> SET STATISTICS ON
    SQL> SHOW STATISTICS
    
    STATISTICS ON

8.64. SHOW TIME Command

The SHOW TIME command displays whether the setting for the local time in the interface prompt is ON or OFF.

8.64.1. Syntax

SHOW TIME

8.64.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.64.3. Example

  • This command shows that the setting for the local time in the SQL prompt is OFF:

    SQL> SHOW TIME
    
    TIME OFF

8.65. SHOW TIMING Command

The SHOW TIMING command displays whether the setting for the elapsed time is ON or OFF.

8.65.1. Syntax

SHOW TIMING

8.65.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • If the SET TIMING command is set to ON, the elapsed time information is displayed.

8.65.3. Example

  • This command displays the elapsed time information because the SET TIMING command is enabled:

    SQL> SET TIMING ON
    SQL> SHOW TIME
    
    TIME OFF
    
    Elapsed :00:00:00.000

8.66. SPOOL Command

The SPOOL command logs the entered commands and their output from TrafCI to a log file.

8.66.1. Syntax

SPOOL { ON [ CLEAR, QUIET, CMDTEXT { ON | OFF } ]
      | log-file [ CLEAR, QUIET, CMDTEXT { ON | OFF } ]
      | OFF
      }
  • ON

    starts the logging process and records information in the sqlspool.lst file in the `bin directory.

  • ON CLEAR

    instructs TrafCI to clear the contents of the sqlspool.lst file before logging new information to the file.

  • QUIET

    specifies that the command text is displayed on the screen, but the results of the command are written only to the log file and not to the screen.

  • CMDTEXT ON

    specifies that the command text and the log header are displayed in the log file.

  • CMDTEXT OFF

    specifies that the command text and the log header are not displayed in the log file.

  • log-file

    is the name of a log file into which TrafCI records the entered commands and their output. If you want the log file to exist outside the local directory where you launch TrafCI (by default, the bin directory), then specify the full directory path of the log file. The log file does not need to exist, but the specified directory must exist before you execute the SPOOL command.

  • log-file CLEAR

    instructs TrafCI to clear the contents of the specified log-file before logging new information to the file.

  • OFF

    stops the logging process.

8.66.2. Considerations

  • You must enter the command on one line. The command does not require an SQL terminator.

  • Use a unique name for each log file to avoid writing information from different TrafCI sessions into the same log file.

8.66.3. Examples

  • This command starts the logging process and records information to the sqlspool.lst file in the bin directory:

    SQL> SPOOL ON
  • This command starts the logging process and appends new information to an existing log file, persnl_updates.log, in the local directory (the same directory where you are running TrafCI):

    SQL> SPOOL persnl_updates.log
  • This command starts the logging process and appends new information to a log file, sales_updates.log, in the specified directory on a Windows workstation:

    SQL> SPOOL c:\log_files\sales_updates.log
  • This command starts the logging process and appends new information to a log file, sales_updates.log, in the specified directory on a Linux or UNIX workstation:

    SQL> SPOOL ./log_files/sales_updates.log
  • This command starts the logging process and clears existing information from the log file before logging new information to the file:

    SQL> SPOOL persnl_ddl.log CLEAR
  • This command starts the logging process and records information to the sqlspool.lst file in the bin directory:

    SQL> LOG ON
  • This command starts the logging process and appends new information to an existing log file, persnl_updates.log, in the local directory (the same directory where you are running TrafCI):

    SQL> LOG persnl_updates.log
  • This command starts the logging process and appends new information to a log file, sales_updates.log, in the specified directory on a Windows workstation:

    SQL> LOG c:\log_files\sales_updates.log
  • This command starts the logging process and appends new information to a log file, sales_updates.log, in the specified directory on a Linux or UNIX workstation:

    SQL> LOG ./log_files/sales_updates.log
  • This command starts the logging process and clears existing information from the log file before logging new information to the file:

    SQL> LOG persnl_ddl.log CLEAR
  • This command start the logging process, clears existing information from the log file, and specifies that the command text and log header is not displayed in the log file:

    SQL> LOG c:\temp\a.txt clear, CMDTEXT OFF
    SQL> SELECT * FROM trafodion.toi.job
    +>;
    
    JOBCODE JOBDESC
    ------- ------------------
        100 MANAGER
        450 PROGRAMMER
        900 SECRETARY
        300 SALESREP
        500 ACCOUNTANT
        400 SYSTEM ANALYST
        250  ASSEMBLER
        420 ENGINEER
        600 ADMINISTRATOR
        200 PRODUCTION SUPV
    
    --- 10 row(s) selected.
    
    SQL> LOG OFF

    Output of c:\temp\a.txt

    JOBCODE JOBDESC
    ------- ------------------
         100 MANAGER
         450 PROGRAMMER 900 SECRETARY
         300 SALESREP
         500 ACCOUNTANT
         400 SYSTEM ANALYST
         250 ASSEMBLER
         420 ENGINEER
         600 ADMINISTRATOR
         200 PRODUCTION SUPV
    
    --- 10 row(s) selected
  • This command start the logging process, clears existing information from the log file, and specifies that no output appears on the console window:

    SQL> LOG c:\temp\b.txt CLEAR, CMDTEXT OFF, QUIET
    SQL> SELECT *
    +>FROM trafodion.toi.job;
    SQL> LOG OFF

    Output of c:\temp\b.txt

    ====================
    JOBCODE JOBDESC
    ------- ------------------
         100 MANAGER
         450 PROGRAMMER
         900 SECRETARY
         300 SALESREP
         500 ACCOUNTANT
         400 SYSTEM ANALYST
         250 ASSEMBLER
         420 ENGINEER
         600 ADMINISTRATOR
         200 PRODUCTION SUPV
    
    --- 10 row(s) selected
  • This command stops the logging process:

    SQL> LOG OFF

For more information, see Log Output.

8.67. VERSION Command

The VERSION command displays the build versions of the Trafodion database, Trafodion Connectivity Service, Trafodion JDBC Type 4 Driver, and TrafCI.

8.67.1. Syntax

VERSION

8.67.2. Considerations

You must enter the command on one line. The command does not require an SQL terminator.

8.67.3. Example

  • This command shows versions of the Trafodion database, Trafodion Connectivity Service, Trafodion JDBC Type 4 Driver, and TrafCI:

    SQL> VERSION
    
    Trafodion Platform              : Release 0.8.0
    Trafodion Connectivity Services : Version 1.0.0 Release 0.8.0
    Trafodion JDBC Type 4 Driver    : Traf_JDBC_Type4_Build_40646)
    Trafodion Command Interface     : TrafCI_Build_40646
    
    SQL>
  • If TrafCI is started with the -noconnect parameter, the VERSION command displays only TrafCI and the Trafodion JDBC Type 4 Driver versions.

    C:\Program Files (x86)\Apache Software Foundation\Trafodion Command Interface\bin> TRAFCI -noconnect
    
    Welcome to Trafodion Command Interface
    Copyright(C) 2013-2105 Apache Software Foundation
    
    SQL> VERSION
    
    Trafodion Platform              : Information not available.
    Trafodion Connectivity Services : Information not available.
    Trafodion JDBC Type 4 Driver    : Traf_JDBC_Type4_Build_40646
    Trafodion Command Interface     : TrafCI_Build_40646